T48G - BLF/LineKey

[Futureweb]

Hello,
I'm trying to create the Auto-Provisioning Template for our new T48G Phones conntected to 3CX PBX.

I'm struggling a bit with the BLF/LineKeys ...
The first 2 Keys (left upper side) are always shown as *Line Keys* and I can't assign them as BLF?!?
No matter what I configure within Template - they always show the Name configured for this Phone ...

Hope someone can help me on this?! (I'm pretty new to BPX, SIP, ...)

Thx
Andreas Schnederle-Wagner

[James_Yealink]

Hello Andreas,

The 2 key can be changed.
Please go to phone web interface-> Setting-> Upgrade, do you see "Reset Local Configuration"?
If yes, please reset it and provision again. If not, can you show us the template.

Regards,
James

[Futureweb]

Hi James,

I'm using the standard 3CX Template for your Phones.
Had to rewrite pretty much to change this behaviour ... within the TPL they static assigned the 2 First Buttons for LineKey and starting with Button 3 for BLFs ...
It's working now!

Thank you, bye from Austria
Andreas