New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G - Bluetooth Headset Issue
Author Message
DJ_HiP Offline
3CX Partner
**

Posts: 16
Joined: Jun 2013
Reputation: 0
Post: #1
T46G - Bluetooth Headset Issue
I believe this is more a bug than a configuration issue.

Essentially what is happening is the T46G is holding the Bluetooth Audio channel OPEN even when not in a phone call. The only way to close the audio channel is to hit the Headset button to disable headset mode (Even though the headset stays paired to the T46G).

With mobile phones (Or even older Bluetooth base stations from the likes of Plantronics) when a phone call comes in the Phone opens the audio channel and your Bluetooth headset 'wakes' from sleep mode and allows audio transmission; when the phone call is completed it signals the headset to go back to sleep and you don't waste your battery using talk time when no body is talking.

I've confirmed this with 3 different Bluetooth Adapters (Including the Yealink BT40) and with three different Bluetooth Headsets (Plantronics, Jawbone and Bose). The problem is not with the headsets or Bluetooth adapters.

Yealink are you able to update the firmware on the phones to support using Standby mode correctly?

(If any one knows of a config change that would allow for this I'm all ears as well Smile )
(This post was last modified: 12-05-2013 07:33 AM by DJ_HiP.)
12-05-2013 07:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 22
Post: #2
RE: T46G - Bluetooth Headset Issue
Hi DJ_HiP,

This issue we will fix in next version. Smile
12-09-2013 03:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
DJ_HiP Offline
3CX Partner
**

Posts: 16
Joined: Jun 2013
Reputation: 0
Post: #3
RE: T46G - Bluetooth Headset Issue
(12-09-2013 03:40 PM)Yealink Support Wrote:  Hi DJ_HiP,

This issue we will fix in next version. Smile

Fantastic, I'll post back with the results when the firmware is available Smile
12-11-2013 11:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #4
RE: T46G - Bluetooth Headset Issue
what brands of Bluetooth adaptors work with the T46G?
02-21-2014 05:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 22
Post: #5
RE: T46G - Bluetooth Headset Issue
Hi jasit,

Please refer to below link for tested headset list.
Tested headset list compatible with yealink ip phone
02-21-2014 08:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bryiley Offline
Junior Member
**

Posts: 6
Joined: Mar 2014
Reputation: 0
Post: #6
RE: T46G - Bluetooth Headset Issue
I am seeing the same issues with my Plantronics Voyager Pro HD headset. I have tested with several other devices ie..cisco, android, etc... and have no problems with standby. I use with the yealink t46g (Firmware 28.72.0.1) and the headset is dead after 3-4hrs (this is after a good 12 hr charge). It is not hanging up or going into standby after the phone ends the call. We have about 60 of these headsets in the field and not had issues until the T46G. I did notice the tested compatibility list and did not see my headset on there. Am I just out of luck to think that this will be fixed with future updates to the firmware?
03-04-2014 12:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 22
Post: #7
RE: T46G - Bluetooth Headset Issue
Hi bryiley,

We do make a custom verson yet.
Please test in below link.
28.71.0.185
03-04-2014 06:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
pacpac Offline
Junior Member
**

Posts: 20
Joined: Aug 2013
Reputation: 0
Post: #8
RE: T46G - Bluetooth Headset Issue
Hi, seems to work on my end now. Changed firmware from 28.72.0.1. to 28.71.0.185. Using Plantronics Voyager Legend w/firmware 99. The headset goes to standby after the call and connects when placing a call. The headset button on the T46G is continuously lit up. Great improvement in the firmware for people using this headset!
03-06-2014 04:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 22
Post: #9
RE: T46G - Bluetooth Headset Issue
Thanks to your feedback.
03-06-2014 09:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bryiley Offline
Junior Member
**

Posts: 6
Joined: Mar 2014
Reputation: 0
Post: #10
RE: T46G - Bluetooth Headset Issue
My sincere apologies on not getting to this till now. I have back rev'd the firmware on the phone as instructed. It now sits at 28.71.0.185 and I am having the same result as posted by pacpac. The green headset light is lit. When I begin dialing I hear a beep bleep beep in my ear from the headse. I am able to complete the call and I end the call. My only question at this point is, should I conclude when the end call button is pushed or the call disconnects (Ends) and the desktop of the phone screen appears that the headset is then in standby? Given that the beep bleep beep happens again when I pickup and dial im making an assumption that the answer is yes beings there is no real way to confirm that.
03-20-2014 01:40 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Remote directory recursion depth limit - Yealink T46G levstik 2 109 07-12-2019 12:06 PM
Last Post: levstik
  EHS36 Firmware via T46G - User Name Password Richard242 1 149 07-12-2019 08:36 AM
Last Post: Travis_Yealink
  T46G Who 1 154 06-27-2019 01:25 PM
Last Post: jolouis
  T46G Remote Phone Book AdamB 2 488 05-14-2019 08:15 AM
Last Post: AdamB
  Bluetooth headset is recognized, but can not pair TStaudte 1 433 05-12-2019 03:25 PM
Last Post: Jensen_Yealink
  T48 Wallpaper (White Text or Black Text) Issue elementpbx 17 16,908 03-25-2019 12:05 AM
Last Post: ParagonVoIP
  T46G WiFi cannot access web gui SimpleCom 5 857 03-21-2019 04:39 AM
Last Post: SimpleCom
  XML Input Field Issue with Space in String nickpl 11 3,379 02-22-2019 01:53 PM
Last Post: nickpl
  Wireless Compatablilty with T46S and T46G 1CCT 0 372 02-11-2019 06:09 PM
Last Post: 1CCT
  What cipher will T46G support in OpenVPN AndyInNJ 1 431 02-07-2019 01:32 PM
Last Post: jolouis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication