OEM version check disaffinity

[ITSD]

Because we need the repeater functionality we downloaded the latest firmware: http://www.yealink.com/Upload/W52P/V40/26.30.0.50.zip
and flash software: http://www.yealink.com/Upload/W52P/V40/H...20Tool.zip

We then tried to upgrade several W52 handsets, it only succeeded at one of them. The current firmware of one that failed to update is: 26.30.188.14

We also tried it on different base stations with firmware: 25.30.0.50 en 25.30.0.53

Still the popup-error remains when flashing the firmware: OEM version check disaffinity, skip update.

Please advice.

[Yealink Support]

Hi ITSD,

Your handset version 26.30.188.14 can support repeater now. You don't need to update your version and can use repeater now.

[ITSD]

(11-27-2013 11:26 AM)Yealink Support Wrote:  Hi ITSD,

Your handset version 26.30.188.14 can support repeater now. You don't need to update your version and can use repeater now.

Thank you for your reply. I will test it.
What about that error, is it normal or can we do something about it?

Besides, now I have 1 handset on the new firmware and 4 on a lower one. I would like them all to be on the new firmware as it also solves some other problems.

[Tomsworld]

I've got the same error, how do I upgrade to newer versions ? Or where do I find the oem versions ?

I only noticed the message when I wanted to upgrade through usb, the web does't give any error.

[Yealink Support]

Hi Tomsworld,

What is the version of your handset? Do you mean when you upgrade handset via webpage, you can upgrade successfully?
I advise you to find higher custom version from your distributor.

[proceau]

I'm egale problem, it's the handset ship with Base, it's in 26.40.115.1 it's OEM ( brad YeaLink ) and it's refuse to upgrade to 26.50.0.20, in Web never see news firmare ( other handset no problem ) and with USB OEM message.

[complex1]

proceau Wrote:it's in 26.40.115.1

Please contact Tiptel for a firmware upgrade.

[CsinBoy]

Dear Yealink Support!

I have the same problem...

We have a W52 BASE, which Firmware is now "25.73.0.40", and it uses 5 devices.
Today, I try to update all devices, but I could only upload 4 devices, and with the fifth, I could not!

The problematic device's ROM is "26.40.188.1", and I try to upload to "26.73.0.11".


I'm waiting Your reply,

Thanks,
Krisztian