[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Two phones answer when one phone answers
Author Message
jholcombe Offline
Junior Member
**

Posts: 22
Joined: Jul 2014
Reputation: 0
Post: #1
Two phones answer when one phone answers
Two extensions 721 and 722 are members of "Ring All" ring group 951. Two virtual extensions 90001 and 90002 in a Patton PSTN gateway are set to connect inbound calls to ring group 951. Custom parameter ALLOWUSEBUSYOPTFORGROUP is set to 1, because the phones need to ring even if the the secretary is already on a call.

Last night I upgraded from 3CX 12.5 to 14. In the process I also upgrade the firmware on all of our Yealink T46G phones to the included 28.73.0.50 firmware.

Now if both virtual extensions 90001 and 90002 have an inbound call and the secretary on xt 721 answers a call, extension 722 also answers the same call on speakerphone, even if no-one is sitting at the desk for xt 722. It is essentially a 3-way call between the inbound caller, xt 721, and xt 722. What would cause 722 to answer the call? 722 answers the call at the exact same time that 721 does. Both phones stop ringing at that point, even though there is still another inbound caller on the other line, and ALLOWUSEBUSYOPTFORGROUP is set to 1. I don't believe we had this problem until after upgrading to 3CX v 14 and upgrading the firmware on the T46G phones.

I'm not sure if it's a 3CX issue, a Yealink issue, or both. I looked over the 3CX logs and I can't find anything obvious, but if anyone else wants to look them over please be my guest! I really need to get this resolved quickly as a deadline (for me) is approaching to have this functional and, for the most part, bug free. The log below is grouped by call #.

06-Oct-2015 19:47:01.313 Leg L:74.1[Line:90002<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:47:01.313 [CM503008]: Call(C:74): Call is terminated
06-Oct-2015 19:47:01.309 Leg L:74.3[Extn:721] is terminated: Cause: BYE from 10.102.100.8:5062
06-Oct-2015 19:46:48.846 Leg L:74.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:46:48.844 [CM503003]: Call(C:74): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:46:48.731 [CM503007]: Call(C:74): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:46:48.730 [CM503007]: Call(C:74): Line:90002<<anonymous has joined, contact <sip:90002@10.102.70.1:5061>
06-Oct-2015 19:46:48.728 L:74.3[Extn:721] has joined to L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.551 [CM503025]: Call(C:74): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.547 [CM503025]: Call(C:74): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.501 [CM503027]: Call(C:74): From: Line:90002<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:16.501 [CM503004]: Call(C:74): Route 1: from L:74.1[Line:90002<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:16.500 [CM503001]: Call(C:74): Incoming call from Line:90002<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:47:03.645 Leg L:75.1[Line:90001<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:47:03.644 [CM503008]: Call(C:75): Call is terminated
06-Oct-2015 19:47:03.640 Leg L:75.2[Extn:722] is terminated: Cause: BYE from 10.102.100.9:5062
06-Oct-2015 19:46:49.837 Leg L:75.3[Extn:721] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.8:5062
06-Oct-2015 19:46:49.835 [CM503003]: Call(C:75): Call to <sip:721@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.8:5062
06-Oct-2015 19:46:49.715 [CM503007]: Call(C:75): Extn:722 has joined, contact <sip:722@10.102.100.9:5062>
06-Oct-2015 19:46:49.713 [CM503007]: Call(C:75): Line:90001<<anonymous has joined, contact <sip:90001@10.102.70.1:5060>
06-Oct-2015 19:46:49.711 L:75.2[Extn:722] has joined to L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.575 [CM503025]: Call(C:75): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.571 [CM503025]: Call(C:75): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.526 [CM503027]: Call(C:75): From: Line:90001<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:45.526 [CM503004]: Call(C:75): Route 1: from L:75.1[Line:90001<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:45.524 [CM503001]: Call(C:75): Incoming call from Line:90001<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:48:16.786 Leg L:76.3[Extn:721] is terminated: Cause: BYE from PBX
06-Oct-2015 19:48:16.785 [CM503008]: Call(C:76): Call is terminated
06-Oct-2015 19:48:16.782 Leg L:76.1[Line:90001<<anonymous] is terminated: Cause: BYE from 10.102.70.1:5060
06-Oct-2015 19:47:33.099 Leg L:76.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:47:33.098 [CM503003]: Call(C:76): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:47:33.076 [CM503007]: Call(C:76): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:47:33.075 [CM503007]: Call(C:76): Line:90001<<anonymous has joined, contact <sip:90001@10.102.70.1:5060>
06-Oct-2015 19:47:33.072 L:76.3[Extn:721] has joined to L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.522 [CM503025]: Call(C:76): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.518 [CM503025]: Call(C:76): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.473 [CM503027]: Call(C:76): From: Line:90001<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:27.473 [CM503004]: Call(C:76): Route 1: from L:76.1[Line:90001<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:27.471 [CM503001]: Call(C:76): Incoming call from Line:90001<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:48:20.486 Leg L:77.1[Line:90002<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:48:20.486 [CM503008]: Call(C:77): Call is terminated
06-Oct-2015 19:48:20.485 Leg L:77.3[Extn:721] is terminated: Cause: BYE from 10.102.100.8:5062
06-Oct-2015 19:48:01.458 Leg L:77.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:48:01.457 [CM503003]: Call(C:77): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:48:01.346 [CM503007]: Call(C:77): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:48:01.346 [CM503007]: Call(C:77): Line:90002<<anonymous has joined, contact <sip:90002@10.102.70.1:5061>
06-Oct-2015 19:48:01.344 L:77.3[Extn:721] has joined to L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.530 [CM503025]: Call(C:77): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.527 [CM503025]: Call(C:77): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.482 [CM503027]: Call(C:77): From: Line:90002<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:46.482 [CM503004]: Call(C:77): Route 1: from L:77.1[Line:90002<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:46.480 [CM503001]: Call(C:77): Incoming call from Line:90002<<anonymous to <sip:951@10.102.10.1:5060>


Any help or advice is greatly appreciated. Thank you!,

--John
10-07-2015 02:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #2
RE: Two phones answer when one phone answers
I would recommend trying the previous firmware to determine who the culprit is.
Also the logs above need more detail. Turn on verbose mode.

It sounds like maybe one extension has AUTOANSWER enabled for all calls.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 10-07-2015 10:30 PM by CWR.)
10-07-2015 10:30 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Multicast Stops Working until Phone Rebooted Blake1 11 7,539 09-21-2023 05:47 PM
Last Post: axiompm
  Is there a way to get the incoming caller phone number with an Action URI? troy44 1 331 09-04-2023 01:46 PM
Last Post: Regend_Yealink
  auto-answer & custom ringtone crashdox 6 893 08-12-2023 04:02 AM
Last Post: crashdox
  On MP50s responding to some phone trees ends the call TRK45 1 795 05-18-2023 04:46 PM
Last Post: complex1
  Import xml contacts to Yealink Phone upon provisioning via TFTP vusald 1 1,548 02-18-2023 06:30 PM
Last Post: complex1
  WH66 Answer button / Softphone support gareth20202 2 1,651 02-15-2023 11:34 AM
Last Post: karthikrm
  Do Yealink IP Phones Support ZRTP? nolto 0 763 01-15-2023 11:35 PM
Last Post: nolto
  W60B - URL for Remote Phone Book Bosstoad 2 1,962 01-06-2023 02:58 AM
Last Post: Bosstoad
  integrate Salesforce CRM to Yealink phones mehdi.ett 3 10,576 12-21-2022 02:20 PM
Last Post: Arun Kiran
  Can MP56 Teams phone be converted to a standard SIP phone? jliu@grandriver.ca 0 1,056 11-10-2022 01:25 AM
Last Post: jliu@grandriver.ca

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication