[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BLF and Call Pickup
Author Message
fra81ita Offline
Junior Member
**

Posts: 3
Joined: Nov 2013
Reputation: 0
Post: #1
Exclamation BLF and Call Pickup
Hi,
I'm using some Yealink phones (T32G, T20, T28P and T38G) as testing base for our customers requests and demos.
I'm trying to implement the BLF with "Direct Call Pickup" on Yealink phones.
I've configured the phone as written on some forums and guides, but it won't work.
I can see the light blinking when the phone is ringing, but if I try to pickup the call I receive on "Declined" on the phone

The feature code is working if I use "Direct Pickup" as DSS Key Type and if i dial it from the phone.

Looking at the Asterisk log (live with asterisk -r(and some vvvv) ), I can't see any "activity" sent from the phone, it's shown only the notify of the state from idle to InUse and back to idle.

If I enable "Visual Alert for BLF Pickup" pick it up from the screen is working, but from the button I receive only declined.

I did all the test with three phones (T32G, T20 and T28P). The T38G is in use from a colleague.

Our configuration is:

Asterisk 11.5.0 (provided with Elastix 2.4.0)

T32G
Firmware Version 32.70.0.130
Hardware Version 22.1.2.32.0.0.0
T20
Versione Firmware 9.70.0.130
Versione Hardware 7.0.1.61
T28P
Firmware Version 2.71.0.140
Hardware Version 1.0.0.53

Three extensions in the same callgroup and pickup group

Attached you can find some print screen.

Could you help me to find out the problem?

Thank you very much in advance
Francesco Capuano


Attached File(s) Thumbnail(s)
                   
11-20-2013 09:30 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
John_K Offline
Junior Member
**

Posts: 15
Joined: Jul 2013
Reputation: 1
Post: #2
RE: BLF and Call Pickup
Do you have notifycid=yes or notifycid=ignore-context enabled in your sip.conf?

do a sip set debug peer <PEERNUM> on your asterisk console and try calling and picking up your call.

I have it working on 2.70.0.150 with Asterisk 1.8
11-21-2013 06:09 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
fra81ita Offline
Junior Member
**

Posts: 3
Joined: Nov 2013
Reputation: 0
Post: #3
RE: BLF and Call Pickup
(11-21-2013 06:09 AM)John_K Wrote:  Do you have notifycid=yes or notifycid=ignore-context enabled in your sip.conf?

do a sip set debug peer <PEERNUM> on your asterisk console and try calling and picking up your call.

I have it working on 2.70.0.150 with Asterisk 1.8

Yes, I got it.
Call pickup is working using the feature code and the DSS Key "Direct Pickup". It isn't working only if associated with BLF.

PS: Thank you very much for your reply

----------------------------------

Also enabling debug, I don't have any info.
16 is the ringing extension and 10 is who try to pick up
On the screen, when I press the BLF button, I got only these lines:

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Extension Changed 10[ext-local] new state InUse for Notify User 16
== Extension Changed 10[ext-local] new state Idle for Notify User 16 (queued)
(This post was last modified: 11-21-2013 07:06 PM by fra81ita.)
11-21-2013 05:28 PM
Find all posts by this user    like0    dislike1 Quote this message in a reply
fra81ita Offline
Junior Member
**

Posts: 3
Joined: Nov 2013
Reputation: 0
Post: #4
Wink RE: BLF and Call Pickup
OK, I found the solution.

The Setting in "Account" -> "Advanced" -> (Account Number) -> "Dialog-Info Call Pickup" must be DISABLED.

Otherwise "Call Pickup on BLF" doesn't work on Asterisk PBX.


Attached File(s) Thumbnail(s)
   
(This post was last modified: 11-21-2013 08:07 PM by fra81ita.)
11-21-2013 08:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to configure T27G TRAN key in Call Fwd Custom mode ? oliv 0 2,117 04-07-2020 02:20 PM
Last Post: oliv
  USB call recording David D 5 9,504 05-15-2018 07:00 PM
Last Post: YOVU Cloud
  T27G no longer option to transfer call during ringing state DmitryTsyganov 1 4,527 04-16-2018 11:16 AM
Last Post: Travis_Yealink
  Call Park customization James Martin 2 4,663 04-02-2018 06:04 PM
Last Post: James Martin
  Current time not displayed when a call is missed John62 0 2,728 02-16-2018 05:07 PM
Last Post: John62
  Call Parking - Yealink Phone - Asterisk 11 vs 13 Velocita Technology 1 4,825 12-26-2017 06:06 AM
Last Post: Lucia_Yealink
  Call Waiting Ring Option moshebt 2 4,993 12-15-2017 08:30 AM
Last Post: Elaine_Yealink
  Delayed Action URL call MaartenBode 2 6,239 12-01-2017 09:21 AM
Last Post: AdamNTX
  T27G change programmable key on incoming call EIP 3 6,527 11-28-2017 07:30 AM
Last Post: Evan_Yealink
  Call Park Mode transfer on T48G jasonblewis 2 6,924 11-09-2017 01:26 AM
Last Post: Aishion_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication