[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to disable the warning "out coverage" tone
Author Message
anonymous1664059072296
Unregistered

 
Post: #1
How to disable the warning "out coverage" tone
Dear Support,
is it possible to disable the warning "out coverage" tone?
I don't find that, in the web configuration.
is it possible to disable it, by file.config method?

Regards
Walter
11-19-2013 09:20 PM
     Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #2
RE: How to disable the warning "out coverage" tone
Hi Walter,

Do you mean a verification tone with repeater?

To find the best possible location for the repeater, you may need to try various locations.
Place a call and walk around with the handset to determine the base station’s coverage
area. The verification tone allows you to easily check the extent of the repeater’s
coverage area. The tone is audible on the handset during a call.
To activate the verification tone on the repeater:
1. Switch off the repeater ( disconnect the power adapter).
2. Switch it on for 1 to 5 seconds and switch it off again.
3. Switch it on again. The LED indicator on the repeater flashes slowly.
4. Switch it off again.
5. Switch it on again.
The verification tone is then activated.

Place a call using the handset to check whether the handset is working in the extended
area of the repeater. If the call is successfully handled by the repeater, you can hear the
verification tone from the handset every few seconds.
To deactivate the verification tone, repeat the above steps.

You can also refer to more details in below link.
http://www.yealink.com/Upload/W52P/V40/Y...0Guide.pdf
11-20-2013 03:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1664059072296
Unregistered

 
Post: #3
RE: How to disable the warning "out coverage" tone
Dear support,
apologize for misunderstanding.
I mean for the warning out coverage tone on the standard W52P without repeater. When the handset is far from the base unit and the radio signal strength is low, the handset sends out a "beep" tone. I want to switch OFF this kind of tone. Is it possible??
Regards
11-20-2013 04:33 PM
     Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #4
RE: How to disable the warning "out coverage" tone
Hi Walter,

We have deleted this feature in the latest version and you can upgrade your base to it.
25.30.0.50 ( Base Firmware )
http://www.yealink.com/SupportDownloadfi...8&flag=142
11-21-2013 09:26 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1664059072296
Unregistered

 
Post: #5
RE: How to disable the warning "out coverage" tone
Dears,
unfortunatelly at the moment we are using your special FW 25.30.0.54 cause opened ticket #3797.
How can I obtain the "out coverage" tone OFF with 25.30.0.54 version??

Best Regards
W.
11-21-2013 04:44 PM
     Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #6
RE: How to disable the warning "out coverage" tone
Hi Walter,

Sorry for the misunderstanding.You need to upgrade your handset firmware to 50.
http://www.yealink.com/Upload/W52P/V40/26.30.0.50.zip
please refer to the upgrade guide of handset.
http://www.yealink.com/Upload/W52P/V40/H...20Tool.zip

You can refer to more details in below link.
http://www.yealink.com/SupportDownloadfi...8&flag=142
11-22-2013 10:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1664059072296
Unregistered

 
Post: #7
RE: How to disable the warning "out coverage" tone
Dear Support.
I can confirm. With handset FW version 50, the warning tone "out of coverage" is OFF.
Thank you and best regards
Walter
12-04-2013 04:56 PM
     Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Anon.Call Rejection, cannot disable DJ_HiP 4 12,357 09-03-2018 03:01 AM
Last Post: DJ_HiP
  W52P disable call ended display PhilipDarnell 1 5,876 11-22-2017 07:14 PM
Last Post: janduy.manzanos@gmail.com
  Disable Notifications HinesNetwork 7 17,038 01-03-2016 09:06 AM
Last Post: ast
  use 2 base for big dect coverage? mannebk 3 9,012 04-29-2015 05:29 AM
Last Post: Flora_Yealink
  How To Disable Ring Back Tone in Yealink W52P rizvirgo 3 10,699 04-10-2015 10:38 AM
Last Post: rizvirgo
  grab a dial tone when pressing green handset button? asinshesq 0 4,459 03-14-2015 04:38 AM
Last Post: asinshesq
  Different ring-tone for specific incoming numbers belias 2 7,986 02-14-2015 05:06 AM
Last Post: butrus
  double tone fropa 6 12,147 12-08-2014 11:23 AM
Last Post: James_Yealink
  Disable Voice Mail Tone lleo_ 1 7,135 10-24-2014 08:52 AM
Last Post: Coco_Yealink
  W52P - Call Waiting tone mkeuter 1 8,667 09-25-2014 10:54 AM
Last Post: James_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication