[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink T42G on Wildix PBX
Author Message
filya Offline
Junior Member
**

Posts: 4
Joined: Nov 2013
Reputation: 0
Post: #1
Yealink T42G on Wildix PBX
Hi,

Would need some help on configuring T42G on Wildix W40 PBX.
The problem is as follows:
1) the phone is registering on PBX, was connected from internal LAN and external (via Internet from home), gives the same results
it results registered on PBX and on the phone.
2) when trying to make a call from the phone to internal or external number, this gives no result, message on the display (Not allowed here)
3) when trying to call to the T42G phone from another phone on the network, the T42G is ringing, but when answered the other phone does not see that the call was answered, and on T42G there are no sound coming out and in, but time is ticking as the call is in progress
4) tried to setup soft-phones on iPhone and on other PC getting to PBX via Internet with the same account like T42G, and in both cases all is working fluently (can make and receive calls without any problem)
5) other Wildix phones that are on the network like WP480 or WP490 are working fine in both cases, if these are connected via Internet or in the internal LAN
6) Setting up T42G with another VOIP provider works great, can call and receive calls

So, the question is what I'm doing wrong?
Is there some particular setup that I'm missing?
Thanks for any help.
11-17-2013 05:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Yealink T42G on Wildix PBX
Hi filya,

Can you provide Syslog level 6, config.bin and pcap for me?
1. Supply a comparation with a phone work well in the same invironment.

Before you export the syslog, please set log level as 6, and reboot the phone, then click Start,and reproduce the issue, then click Stop,and export the trace, syslog, config,bin to us.
(About where to export these files, please refer to attached screenshot.)
These three files are very important for us, hope you can kindly understand.


Attached File(s) Thumbnail(s)
   
11-20-2013 06:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
filya Offline
Junior Member
**

Posts: 4
Joined: Nov 2013
Reputation: 0
Post: #3
RE: Yealink T42G on Wildix PBX
(11-20-2013 06:06 PM)Yealink Support Wrote:  Hi filya,

Can you provide Syslog level 6, config.bin and pcap for me?
1. Supply a comparation with a phone work well in the same invironment.

Before you export the syslog, please set log level as 6, and reboot the phone, then click Start,and reproduce the issue, then click Stop,and export the trace, syslog, config,bin to us.
(About where to export these files, please refer to attached screenshot.)
These three files are very important for us, hope you can kindly understand.

Hi Yealink Support, sorry for late response, been busy for a while.
I have uploaded requested files on my Dropbox:
https://www.dropbox.com/sh/u40whxhj0roczxe/TaV--DSP_t

Please let me know if you need something else.
Thank you!
12-04-2013 07:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: Yealink T42G on Wildix PBX
Hi filya,

Thanks for your files. I have submitted your issue to our R&D.
If any update, i will contact you.
12-06-2013 05:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #5
RE: Yealink T42G on Wildix PBX
Hi filya,

Sorry. Because Our R&D can't see the issue in your files, please reproduce the issue as my above steps and supply above three files to me.
Then supply the contrast pcap of WP480.
Please connect the PC to the pc port of WP480 with a cable, then open a wireshark tool that can make a trace of SIP message.
You can refer to more details in below guide.
http://www.yealink.com/Upload/document/W...uction.rar

If you are convenience, please supply two test accounts in private and we can test in our office, then we can figure it out.
12-12-2013 04:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
filya Offline
Junior Member
**

Posts: 4
Joined: Nov 2013
Reputation: 0
Post: #6
RE: Yealink T42G on Wildix PBX
Hi Yealink Support,

Test accounts sent to you with PM.
Thank you!
12-13-2013 08:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #7
RE: Yealink T42G on Wildix PBX
Hi filya,

Please test below version and kindly feed back to me.
ftp://yealinkftp:yealinkftp@ftp.yealink....10.100.rom
12-31-2013 10:00 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
filya Offline
Junior Member
**

Posts: 4
Joined: Nov 2013
Reputation: 0
Post: #8
RE: Yealink T42G on Wildix PBX
Hi Yealink Support,

Now it's definitely better, it's now possible to make and receive calls.
But other problem that appears is that the calls are not stable, in sense that the maximum duration is 30 seconds,
or the call is dropped right after being answered.
Really don't know what can be the reason of this behaviour.
Can you advise something on this or do further research to understand where is the problem?
Thank you in advance!
01-08-2014 07:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #9
RE: Yealink T42G on Wildix PBX
(01-08-2014 07:27 PM)filya Wrote:  Hi Yealink Support,

Now it's definitely better, it's now possible to make and receive calls.
But other problem that appears is that the calls are not stable, in sense that the maximum duration is 30 seconds,
or the call is dropped right after being answered.
Really don't know what can be the reason of this behaviour.
Can you advise something on this or do further research to understand where is the problem?
Thank you in advance!
Hi filya,

Do you register the twe test accounts that given to me?
Do you test other accounts?
Can you tell me the use scenario?
01-09-2014 01:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
elena_wildix Offline
Junior Member
**

Posts: 2
Joined: Jan 2016
Reputation: 0
Post: #10
RE: Yealink T42G on Wildix PBX
Dear User,

Sorry for noticing your message only now.

Please contact your Wildix Provider or directly Wildix Technical support here http://www.wildix.com/contacts/ - as far as I understand, you have a Wildix phone on the base of Yealink Hardware and you also have a Wildix PBX.
In this case we will be able to help you.
01-25-2016 05:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T48S URL Line Key jogi29 1 382 06-10-2024 08:12 PM
Last Post: jogi29
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 90,358 10-18-2023 12:59 PM
Last Post: sles
  keypad sequence for Forward & DND with Yealink W70B Base kargah 0 1,685 04-18-2023 10:07 PM
Last Post: kargah
  Yealink T27P -Incoming call issue rsarceno 0 1,537 01-25-2023 08:54 AM
Last Post: rsarceno
  Yealink T19 can not automatically hangup inbound calls giaopc94 0 1,969 08-01-2022 09:28 AM
Last Post: giaopc94
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 4 12,609 03-24-2022 10:25 PM
Last Post: maindriver
  Configuring OPENVPN with Yealink Commensus 0 2,777 02-23-2022 09:45 PM
Last Post: Commensus
  Yealink C920 password issue DaveK 3 12,497 09-11-2020 12:02 PM
Last Post: complex1
  Modern Yealink Phonebook Generation Tool rgranholm 2 11,589 04-30-2020 09:03 PM
Last Post: rgranholm
  Multicast / Paging / Intercom - Yealink T58 Ryandh 20 65,746 04-30-2020 03:23 PM
Last Post: Chris708

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication