Billx
Junior Member
Posts: 17
Joined: Mar 2013
|
Pushing XML to a Phone
I am working on an XML application where I am Pushing the PhoneExecute Object to a T28P phone.
I can Push this example and the phone will dial OK and I can talk with extension 5367.
<YealinkIPPhoneExecute Beep="yes">
<ExecuteItem URI="Dial:5367" interrupetCall="no"/>
</YealinkIPPhoneExecute>
However, while I am speaking with extension 5367 and I Push the example below to the same phone, the phone does not disconnect:
<YealinkIPPhoneExecute>
<ExecuteItem URI="Key:CANCEL">
</YealinkIPPhoneExecute>
I have also tried URI="Key:ON_HOOK" and it does not work either.
I did read in another post where someone wanted to push info to a phone in use.
Yealink Tech Support responded with:
"Sorry currently we don't support push XML command during the call/ringing, it only can be used in idle status."
I can understand that and maybe it has changed with the recent release of new firmware. Has it?
Anyway, I don't understand why "Setting Methods" like CANCEL, HOLD and ON_HOOK exist if they cannot be sent to a phone that is in use.
Afterall, the only time I see CANCEL, HOLD and ON_HOOK being used is when a phone is actually in use.....
So maybe I missed something (I hope)
Does anyone have a solution to this??
Thanks
|
|
11-17-2013 12:41 AM |
|
Billx
Junior Member
Posts: 17
Joined: Mar 2013
|
RE: Pushing XML to a Phone
Update:
I updated the phone to 2.71.0.140 and it is working OK now.
|
|
11-18-2013 12:21 AM |
|