[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Provisioning multicast settings – T42G
Author Message
newvistech Offline
Junior Member
**

Posts: 3
Joined: Oct 2013
Reputation: 0
Post: #1
Provisioning multicast settings – T42G
I am attempting to use the Multicast settings in the provisioning template to configure multicast paging on a large number of T42G phones. The phones are running the 29.71.0.112 firmware. I have entered the desired settings into the template and reprovisioned the phones, but the settings are not being applied. It is though that entire section of the template is being passed over. I have several other modifications within the template that are all being applied without issue, but none of the multicast settings are getting pushed out.

Here is the section from the template with my modifications:
################################################################################​#######
## Multicast ##


################################################################################​#######
#Configure the codec of multicast paging.
multicast.codec = PCMU

#Enbale or diable the phone to handle the incoming multicast paging calls when there is a multicast paging call on the phone; 0-Disabled, 1-Enabled (default);
#If enabled, the phone will answer the incoming multicast paging call with a higher priority and ignore that with a lower priority.
multicast.receive_priority.enable = 0

#Configure the priority of multicast paging calls. It ranges from 0 to 10.
multicast.receive_priority.priority = 0

#Configure the listening multicast IP address and port number for the phone. X ranges from 1 to 10.
#multicast.listen_address.X.ip_address =
multicast.listen_address.1.ip_address = 224.0.0.1:50001
multicast.listen_address.2.ip_address = 224.0.0.1:50002

#Configure the lable displayed on the LCD screen when receiving the multicast paging. X ranges from 1 to 10.
#multicast.listen_address.X.label =
multicast.listen_address.1.label = Page 1
multicast.listen_address.2.label = Page 2

################################################################################​​#######

Am I missing something? Is there another setting, or something that needs to be done beyond this for the multicast section to work properly?

Thanks.

UPDATE: There is another file involved in provisioning these phones: y000000000029.cfg, and that file also contains the multicast section. I don't fully understand the relationship between the files, but apparently this file either takes priority or gets applied after the phone's template file. Once I edited the multicast settings in this file, everything worked as expected.
(This post was last modified: 11-13-2013 11:45 PM by newvistech.)
11-13-2013 11:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #2
RE: Provisioning multicast settings – T42G
The Y00000... file is a global file for all phones.

The other one should be based on the mac address -for individual phones - not all users use the same BLS's... the Extension info, etc.

The phone users both files generally for setup.

Having a global file is good for BLF's such as call parking, and other global features.
11-14-2013 08:07 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 1,316 09-19-2023 12:03 AM
Last Post: boniakowski
  Remote Phonebook settings lost.. bluetba 0 1,184 02-23-2023 07:52 PM
Last Post: bluetba
  RPS not working for T41P T42G andrew.manning 0 1,332 02-17-2023 06:29 PM
Last Post: andrew.manning
  account.X provisioning vieri 7 4,734 02-10-2023 07:02 PM
Last Post: vieri
  T46U Not Contacting Provisioning Server 88fingerslukee 0 2,104 09-06-2022 11:43 PM
Last Post: 88fingerslukee
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 4,789 08-30-2022 06:28 PM
Last Post: complex1
Question "Trusted Certificates" and auto provisioning jobst 3 5,993 06-15-2022 11:00 AM
Last Post: dbonnell
  T46G RingCentral Provisioning jszima 0 3,610 03-07-2022 10:24 AM
Last Post: jszima
  Setting of lang.gui via remote provisioning cloudaware 1 4,356 10-26-2021 07:11 PM
Last Post: cloudaware
  zero touch provisioning & firewall gareth20202 2 7,068 10-09-2021 04:55 PM
Last Post: Phil2021

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication