Log in

ebibas · 06-28-2014 04:25 AM

T46G: Upgraded to firmware 28.72.0.25
With the upgrade to firmware 28.72.0.25 I am unable to upload wallpaper images using the web interface; getting HTTPS error 500. (directed to: <ipaddress>/servlet?p=settings-preference&q=uploadWallpaper)

Thank you in advance. Eli.

***Yealink Support*** · 06-28-2014 11:41 AM

Hi ebibas,

Please refer to this post. http://forum.yealink.com/forum/showthread.php?tid=1928

thanks

ebibas · 06-29-2014 05:01 AM

Dear Yealink Support,
I followed your instructions, I am still unable to upload wallpaper images (after upgrading to version 28.72.0.25).
I cleared the cache, tried with IE and with Firefox - no success.

FYI, Product ID: 201403212001. Hardware version 28.1.0.128.0.0.0

Downgraded to version 28.71.0.224 - works fine with this version.

Thanks you.

***Yealink Support*** · 06-30-2014 09:35 AM

Hi ebibas,

Sorry for the inconvenience. Can you send your picture to me? I want to test in my side. You can attach it.

thanks

timalex · 06-30-2014 07:39 PM

@ebibas: Do you tried already what happens after an upgrade back to 28.72.0.25?

zonder · 07-02-2014 04:25 PM

XX.72.0.25 as well as XX.72.0.1 firmwares have bug related to registration on MyPBX.

We have registered near 90 (ninety) T42 and T46 phones on Yeastar U500 PBX and after that new phones stopped to receive assigned extension number after reboot.

We did a lot of testing trying to identify what can cause the issue and ended up with firmware.

Problem was fixed by downgrading firmware for both models to 29.71.0.120 (T42G model) and 28.71.0.180 (T46 model)

***Yealink Support*** · 07-04-2014 08:44 PM

Hi all,

Our R&D have released one new firmware which fixed this issue. Please download it and test it.
It is kindly you can feedback me in this thread.
You can get this firmware from here.>> 28.72.0.38 <<

Thanks in advance

zonder · 07-07-2014 03:40 PM

Sorry, the new 28.72.0.38.rom firmware contains fix for wallpaper only of for something else ?

***Yealink Support*** · 07-11-2014 09:28 AM

Hi zonder,

Our fixed firmware is based on the latest neutral version.
You can download the firmware and try it. Maybe it have fixed your issue already.

thanks

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Unable to apply wallpaper via VMCS	chi-ltd	4	3,302	12-07-2023 09:12 PM Last Post: chi-ltd
	MP54 Firmware	guywonnacott	0	2,871	05-04-2023 05:56 PM Last Post: guywonnacott
	MP50 - Unable to use pound (#) key during a phone call	Alexandre Cottinet	0	3,271	02-14-2023 10:28 PM Last Post: Alexandre Cottinet
	MP50 Custom Image	marknelson@cranberry.co.uk	0	2,532	11-04-2022 12:08 AM Last Post: marknelson@cranberry.co.uk
	T19p E2 recovery firmware	Jensen	1	3,907	10-25-2022 07:33 PM Last Post: complex1
	t46g: intercom over speaker rather than headset?	asinshesq	23	88,728	07-28-2021 11:04 PM Last Post: russman
	T27G Firmware Update Failed	Infonetx	8	25,188	08-03-2020 03:16 PM Last Post: complex1
	Bug on XML Browser Image display	Tercio	1	6,822	05-22-2019 02:54 AM Last Post: Mike_Yealink
	T46G - Disable Line Key Configuration ?	timalex	13	49,379	04-12-2019 09:23 AM Last Post: Johnny88
	T19P E2 auto provision firmware.	NI	1	8,578	10-08-2018 05:15 PM Last Post: NI

Threaded Mode \| Linear Mode T46G - Unable to upload wallpaper image with firmware 28.72.0.25
Author	Message