LDAPS

[savchuk]

Hello!
There are telephones:
IP Phone SIP-T19P E2 - firmware 53.84.0.125
IP Phone SIP-T46S - firmware 66.85.0.5
DECT Base for W52P and W56P - firmware 25.81.0.60
DECT Base W60B - firmware 77.83.0.85
LDAPS contacts do not work on phones: IP Phone SIP-T19P E2, IP Phone SIP-T46S, DECT Base for W52P and W56P. Everything works with the LDAP protocol.
On DECT Base W60B via LDAP (S) contacts work.

Syslog с SIP-T19P E2:
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > LDAP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
192.168.xxx.xxx 11/08 13:55:44.682
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > LDAP log :sys=1,cons=0,time=0,E=3,W=4,N=5,I=6,D=7
192.168.xxx.xxx 11/08 13:55:44.684
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > ANY =3
192.168.xxx.xxx 11/08 13:55:44.687
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > MEM =3
192.168.xxx.xxx 11/08 13:55:44.691
<128>Aug 11 13:55:44 LDAP[1309]: ANY <0+emerg > LDAP =3
192.168.xxx.xxx 11/08 13:55:44.693
<131>Aug 11 13:55:44 GUI [1309:1348]: LDAP<3+error > bind error at "ldap_sasl_bind_s": -1
192.168.xxx.xxx 11/08 13:55:44.713

[savchuk]

The issue has been resolved. The problem was solved by switching to the Device Certificates tab Device Certificates in Customs Certificates.

[complex1]

Glad to hear you were able to find the issue.