T21P E2 VPN

[tlathane]

Hi,

Hope someone can assist,

I am having a problem with loading vpn config files and connecting to vpn.

When a tar my config files with the recommended file structure I get a message saying "Successfully loaded" but can't enable VPN.

If I tar all the config on a flat folder structure, the vpn.cnf files loads but my VPN doesn't connect, below is my vpn config file

client
dev tun
proto tcp
remote xxx.xxx.xxx.xxx 443
tls-remote
route remote_host 255.255.255.255 net_gateway
resolv-retry infinite
nobind
persist-key
persist-tun
ca /config/ca.crt
cert /config/client.crt
key /config/client.key
auth-user-pass
cipher AES-128-CBC
auth MD5
comp-lzo
route-delay 4
verb 3
reneg-sec 0

[Yealink_Michael]

hi

thanks for your information

for your issue, here is the rpely :

1. upgrade to the newest firmware and reset :
http://download.support.yealink.com/down...1.0.15.zip

2. modify the path on vpn.cnf file , it should be :
ca /config/openvpn/keys/ca.crt
cert /config/openvpn/keys/client.crt
key /config/openvpn/keys/client.key

for more information ,please refer to the guide below :
http://support.yealink.com/attachmentDow...V80_63.pdf

at the same time i attached a sample .tar file for your reference

at last , if still any problem, please attached the .tar file and server.ovpn for me so that i can double check .

TKS & BR

Michael

[tlathane]

Hi Michael,

Thank you for the reply.

I upgraded the firmware and edited the vpn.cnf file as recommended.

Just to note that I am using a sophos OpenVPN server, see attached my tar file on you PM

Thanks
Tumelo

[tlathane]

Hi Michael,

Finally managed to get the T21P E2 to connect with the sophos SSL VPN.

See my vpn.cnf file:

client
dev tun
proto tcp
remote xxx.xxx.xxx.xxx 443
tls-remote "/C=za/L=JHB/O=Company Name/CN=me.domain/emailAddress=me@domain.com"
route remote_host 255.255.255.255 net_gateway
resolv-retry infinite
nobind
persist-key
persist-tun
ca /config/openvpn/keys/ca.crt
cert /config/openvpn/keys/client1.crt
key /config/openvpn/keys/client1.key
auth-user-pass /config/openvpn/keys/auth.cfg
cipher AES-128-CBC
auth MD5
comp-lzo
route-delay 4
verb 3
reneg-sec 0

[AleksandrS]

My vpn.cfg != vpn.cnf Thanks. It is working. (Keys 2048 bit)