Remote Phonebook Ringtone

[joshua@itstel.com]

(04-16-2018 03:47 AM)Kevin_Yealink Wrote:  

(04-11-2018 01:54 PM)Kevin_Yealink Wrote:  

(04-11-2018 11:00 AM)joshua@itstel.com Wrote:  I use both the 46G and 46S. FW is 66/28.83.0.10.

My hope was that the Group that I modified via auto provision would change - as it did - but the Groups that the end user created would be left unchanged - they were erased.

This is why I wanted to use the remote phone book for "Company" numbers and leave the local phone book for the end users. But most of my customers would like a different ring tone for the Company phone numbers - which I could not achieve with the Remote Phone Book.

Hi Joshua

Thank you for your information. I will check with R&D and let you know if any update.

Hi Joshua

P&M want to know if it is urgent now for you? If not, can we wait for future FW? Or may at the end of 2018.

BTW, can you also tell me:
1. Actually only end user set distinctive ringtone for different contacts, may I know why you want set distinctive for different department? Is there any specially requirement?
2. I think all 2000 phones already finish deployment, right？ Can you tell me customer name?

This can wait. It's not losing me any business. The main purpose is to put all the customers extensions into a group and assign a different ring tone to that group to achieve a distinctive ring for the phones for extension call versus an outside call. My customers then contact me if there is a name change, I make the change for them in auto provision, then all the phones update automatically.

[Kevin_Yealink]

(04-16-2018 10:29 AM)joshua@itstel.com Wrote:  

(04-16-2018 03:47 AM)Kevin_Yealink Wrote:  

(04-11-2018 01:54 PM)Kevin_Yealink Wrote:  

(04-11-2018 11:00 AM)joshua@itstel.com Wrote:  I use both the 46G and 46S. FW is 66/28.83.0.10.

My hope was that the Group that I modified via auto provision would change - as it did - but the Groups that the end user created would be left unchanged - they were erased.

This is why I wanted to use the remote phone book for "Company" numbers and leave the local phone book for the end users. But most of my customers would like a different ring tone for the Company phone numbers - which I could not achieve with the Remote Phone Book.

Hi Joshua

Thank you for your information. I will check with P&M firstly. And for the distinctive ringtone, maybe you can refer to this FAQ:
http://support.yealink.com/faq/faqInfo?id=1
http://support.yealink.com/faq/faqInfo?id=213

I will keep you update.
Best Regards,
Kevin
Hi Joshua

Thank you for your information. I will check with R&D and let you know if any update.

Hi Joshua

P&M want to know if it is urgent now for you? If not, can we wait for future FW? Or may at the end of 2018.

BTW, can you also tell me:
1. Actually only end user set distinctive ringtone for different contacts, may I know why you want set distinctive for different department? Is there any specially requirement?
2. I think all 2000 phones already finish deployment, right？ Can you tell me customer name?

This can wait. It's not losing me any business. The main purpose is to put all the customers extensions into a group and assign a different ring tone to that group to achieve a distinctive ring for the phones for extension call versus an outside call. My customers then contact me if there is a name change, I make the change for them in auto provision, then all the phones update automatically.

[Kevin_Yealink]

(04-16-2018 01:00 PM)Kevin_Yealink Wrote:  

(04-16-2018 10:29 AM)joshua@itstel.com Wrote:  

(04-16-2018 03:47 AM)Kevin_Yealink Wrote:  

(04-11-2018 01:54 PM)Kevin_Yealink Wrote:  

(04-11-2018 11:00 AM)joshua@itstel.com Wrote:  I use both the 46G and 46S. FW is 66/28.83.0.10.

My hope was that the Group that I modified via auto provision would change - as it did - but the Groups that the end user created would be left unchanged - they were erased.

This is why I wanted to use the remote phone book for "Company" numbers and leave the local phone book for the end users. But most of my customers would like a different ring tone for the Company phone numbers - which I could not achieve with the Remote Phone Book.

Hi Joshua

Thank you for your information. I will check with P&M firstly. And for the distinctive ringtone, maybe you can refer to this FAQ:
http://support.yealink.com/faq/faqInfo?id=1
http://support.yealink.com/faq/faqInfo?id=213

I will keep you update.
Best Regards,
Kevin
Hi Joshua

Thank you for your information. I will check with R&D and let you know if any update.

Hi Joshua

P&M want to know if it is urgent now for you? If not, can we wait for future FW? Or may at the end of 2018.

BTW, can you also tell me:
1. Actually only end user set distinctive ringtone for different contacts, may I know why you want set distinctive for different department? Is there any specially requirement?
2. I think all 2000 phones already finish deployment, right？ Can you tell me customer name?

This can wait. It's not losing me any business. The main purpose is to put all the customers extensions into a group and assign a different ring tone to that group to achieve a distinctive ring for the phones for extension call versus an outside call. My customers then contact me if there is a name change, I make the change for them in auto provision, then all the phones update automatically.

Hi Joshua

Good day.
Our P&M is begin evaluating this request, and he has a question need your reply. Thanks in advanced.

As you said: The main purpose is to put all the customers extensions into a group and assign a different ring tone to that group to achieve a distinctive ring for the phones for extension call versus an outside call.
>> May I know why you want to distinct internal number and external number? Is there specially purpose?

Best Regards,
Kevin

[joshua@itstel.com]

If the user is not sitting at their desk but can hear their phone ring, if they can differentiate if it's a fellow employee calling versus an outside caller, then they may or may not be inclined to stop what they are doing and run to answer the phone.

[Kevin_Yealink]

(05-31-2018 10:20 AM)joshua@itstel.com Wrote:  If the user is not sitting at their desk but can hear their phone ring, if they can differentiate if it's a fellow employee calling versus an outside caller, then they may or may not be inclined to stop what they are doing and run to answer the phone.

Hi Joshua,

Can you tell me what business are the customers in? They will have have many external call daily?

Best Regards,
Kevin

[joshua@itstel.com]

Small businesses with people doing many tasks 5-10 employees. External and internal calls are about equal.

[johnkiniston]

Joshua, Have you thought about using an alert-info header to change the ring for your internal to internal calls?

I do it with Asterisk by setting 'Alert-Info: InternalRing' and having the phone play a different ringtone when it gets that header.

[sebastiaan]

Is there any update on this feature? I would like to use it too.