Log in

stefan@nunetworx.com · 06-18-2013 11:21 PM

When auto provisioning our phones we rely on the user agent string supplied by the phone in the request to the auto_provision.server.url to identify itself, i.e. "Yealink SIP-T46G 28.71.0.70 MAC-Address".

However, on our brand new T46G, firmware 28.71.0.70, it appears to send an empty user agent string by default.

If I export the configuration to config.bin, I can see a section that reads:
[ HttpServer ]
bEnable = 1
nPort = 80
strUserAgent =
strHttpVersion = 1.0
strUseragentDynm = SIP-T46G 28.71.0.70

And if I modify the strUserAgent string and import the configuration again, the phone does indeed supply the user agent string to the auto provision server.

Is there anything we can put in our auto provisioning configurations to get the phone to send a user agent string?

***Yealink Support*** · 06-19-2013 05:32 PM

Hi Stefan,
This is a known issue, please download below firmware and check again:
ftp://Cathy:6br6pcyl@ftp.yealink.com/fir...1.0.85.rom
Thanks.

stefan@nunetworx.com · 06-19-2013 10:02 PM

Thanks!
Problem fixed with the new firmware.

***Yealink Support*** · 06-20-2013 10:02 AM

Great!

chopsywa · 08-10-2013 12:01 AM

Isaac

Your original problem was the user-agent string. MX can't handle colons in there.

When you upgraded your string changed (Mac address gone)

What is confusing to me is that I upgraded my T46 tonight to v.85, yet the agent string is still the same as yours on v.70.

Not sure what is going on here.

Mark

***Yealink Support*** · 08-12-2013 03:17 PM

(08-10-2013 12:01 AM)chopsywa Wrote: Isaac

Your original problem was the user-agent string. MX can't handle colons in there.

When you upgraded your string changed (Mac address gone)

What is confusing to me is that I upgraded my T46 tonight to v.85, yet the agent string is still the same as yours on v.70.

Not sure what is going on here.

Mark

Hi Mark,
Please reset to factory default and check again.
Thanks.

chopsywa · 08-12-2013 03:48 PM

(08-12-2013 03:17 PM)Yealink Support Wrote:
(08-10-2013 12:01 AM)chopsywa Wrote: Isaac

Your original problem was the user-agent string. MX can't handle colons in there.

When you upgraded your string changed (Mac address gone)

What is confusing to me is that I upgraded my T46 tonight to v.85, yet the agent string is still the same as yours on v.70.

Not sure what is going on here.

Mark

Hi Mark,
Please reset to factory default and check again.
Thanks.

Yes thanks for that. Already tried and it worked fine. Thanks again.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	T46G RingCentral Provisioning	jszima	0	4,829	03-07-2022 10:24 AM Last Post: jszima
	user-agent name edit (add mac address)	kapetrosyan	2	9,396	12-30-2019 09:00 AM Last Post: kapetrosyan
	Auto provisioning seams to be (partly) broken in version 83 for T46G	HaraldL	2	11,841	07-02-2019 03:04 PM Last Post: Fraukas2
	DHCP Hostname from User Name	stan0ne	2	11,293	11-07-2018 10:54 AM Last Post: stan0ne
	User access level on W56P	yeacpt	4	13,839	07-09-2018 11:36 PM Last Post: bruno
	Yealink T42S - User Agent and HW version	Ale	4	13,634	01-11-2018 09:48 AM Last Post: Ale
	Language files for T46G & T48G	camouflageX	2	11,453	07-25-2017 06:53 PM Last Post: Kamik
	User Agent	VOIP	14	43,152	06-15-2017 03:07 AM Last Post: Karl_Yealink
	How to change admin and user password	stephenh	2	25,313	10-26-2016 10:37 AM Last Post: oooinzn
	T46G provision screensaver settings	n1cks21	1	8,835	10-11-2016 09:37 PM Last Post: n1cks21

Threaded Mode \| Linear Mode Empty user agent string on T46G
Author	Message