T22-P logo provisioning

[ednt]

Hi Michael,

I just made a factory reset (to avoid an already loaded config)
and tried it again.
The warning of delete is Ok, since no old logo was available.
The new one is again transfered but not applicated.



192.168.18.131 25/11 13:11:06.369
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > Upgrade from com.cfg
192.168.18.131 25/11 13:11:06.385
<134>Nov 25 12:11:19 LIBD[350]: DCMN<6+info > Connecting 192.168.18.251:80
192.168.18.131 25/11 13:11:06.401
<134>Nov 25 12:11:19 LIBD[350]: DCMN<6+info > Connecting IP = 192.168.18.251, Port = 80
192.168.18.131 25/11 13:11:06.401
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Request Line: GET /gemeinschaft/prov/yealink/y000000000005.cfg HTTP/1.1
192.168.18.131 25/11 13:11:06.416
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Host: 192.168.18.251
192.168.18.131 25/11 13:11:06.416
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > User-Agent: Yealink SIP-T22P 7.73.0.50 00:15:65:1b:04:c1
192.168.18.131 25/11 13:11:06.416
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > process response
192.168.18.131 25/11 13:11:06.416
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> response code: 200
192.168.18.131 25/11 13:11:06.416
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Content-Length: 412
192.168.18.131 25/11 13:11:06.432
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> response process finish!
192.168.18.131 25/11 13:11:06.432
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> recv : 412 bytes
192.168.18.131 25/11 13:11:06.432
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > need_cmp_md5=1
192.168.18.131 25/11 13:11:06.447
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > send start provision!!
192.168.18.131 25/11 13:11:06.463
<4>Nov 25 12:11:19 IPP[332]: IPP <4+warnin>479.491.746:unkown msg,000b0001,00000000,00000000
192.168.18.131 25/11 13:11:06.510
<132>Nov 25 12:11:19 ATP [350]: ATP <4+warnin> Target file no exist when delete bin file
192.168.18.131 25/11 13:11:06.572
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > AUTOP: lcd_logo.delete [Fail].
192.168.18.131 25/11 13:11:06.572
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > AUTOP: phone_setting.lcd_logo.mode [0]->[2] [Success].
192.168.18.131 25/11 13:11:06.603
<134>Nov 25 12:11:19 LIBD[350]: DCMN<6+info > Connecting 192.168.18.251:80
192.168.18.131 25/11 13:11:06.713
<134>Nov 25 12:11:19 LIBD[350]: DCMN<6+info > Connecting IP = 192.168.18.251, Port = 80
192.168.18.131 25/11 13:11:06.728
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Request Line: GET /gemeinschaft/prov/yealink/logo.dob HTTP/1.1
192.168.18.131 25/11 13:11:06.728
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Host: 192.168.18.251
192.168.18.131 25/11 13:11:06.728
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > User-Agent: Yealink SIP-T22P 7.73.0.50 00:15:65:1b:04:c1
192.168.18.131 25/11 13:11:06.728
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > process response
192.168.18.131 25/11 13:11:06.744
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> response code: 200
192.168.18.131 25/11 13:11:06.744
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Content-Length: 9678
192.168.18.131 25/11 13:11:06.775
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> response process finish!
192.168.18.131 25/11 13:11:06.775
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> recv : 9678 bytes
192.168.18.131 25/11 13:11:06.775
<132>Nov 25 12:11:19 ATP [350]: ATP <4+warnin> UpgradePrev Exception
192.168.18.131 25/11 13:11:06.775
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > AUTOP: lcd_logo.url [Fail].
192.168.18.131 25/11 13:11:06.837


The used cfg file:

#!version:1.0.0.1

lcd_logo.delete=http://localhost/all
phone_setting.lcd_logo.mode=2
lcd_logo.url=http://192.168.18.251/gemeinschaft/prov/yealink/logo.dob


Any idea?

And sorry, the posting should be in the Auto Provisioning Thread.
So if you can, move it.

Bernd