+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Speed Dial Keys (/showthread.php?tid=983)
Speed Dial Keys - mitch - 11-02-2013 07:12 PM
Is it possible that i could program button 2 to call y number, and also button 3 to call x number.
I have created numbers so they are in my phone book, but a quick dial button would be better for me.
RE: Speed Dial Keys - CWR - 11-04-2013 05:14 AM
which phone model are you using? Do you mean make numeric key 2 be the speed dial?
RE: Speed Dial Keys - mitch - 11-04-2013 06:10 AM
Hello Craig,
Thanks for the reply. I am using a T20P.
I have not used speed dial for years, but yes, lets say for instance, press number 2 then the # button and it then calls the speed dial number that i have stored for number 2. As this is the only phone that i have at home now, the mrs is a little bit upset that she has to dial an extra 5 number for the area code, whereas she did not need to when using a bt land line.
RE: Speed Dial Keys - Yealink Support - 11-04-2013 09:49 AM
Hi mitch,
We do support this feature now but your opinion has been submitted to our product department.
In version 9.71.0.140, i enter the webpage of T20, click the DSSKey option->Programmable key, you can configure speakdial keys in these 9 keys. These speed dial numbers can take effect in idle interface.
RE: Speed Dial Keys - pmterp - 11-15-2013 12:02 AM
(11-02-2013 07:12 PM)mitch Wrote: Is it possible that i could program button 2 to call y number, and also button 3 to call x number.
Log In, go to Settings>Dial Plan>Replace Rule
Example: In prefix enter "1" In replace enter "8005551212"
Now, press 1 and then hold # (send key)
RE: Speed Dial Keys - mitch - 12-04-2013 09:11 PM
(11-15-2013 12:02 AM)pmterp Wrote:(11-02-2013 07:12 PM)mitch Wrote: Is it possible that i could program button 2 to call y number, and also button 3 to call x number.
Log In, go to Settings>Dial Plan>Replace Rule
Example: In prefix enter "1" In replace enter "8005551212"
Now, press 1 and then hold # (send key)
Thank you pmterp.
That worked perfectly.
Mitch