T48G Incoming Call Problem - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: T48G Incoming Call Problem (/showthread.php?tid=9356) |
T48G Incoming Call Problem - JUrso - 09-29-2015 08:19 AM I have a T48G with 3 SIP lines configured. On firmware 35.80.0.60 and 35.80.0.70 an incoming call will always light the first account button regardless of which line is ringing. If I downgrade to 35.73.0.50 they light properly. Is this a bug in the new firmware? RE: T48G Incoming Call Problem - Karl_Yealink - 09-29-2015 03:01 PM Hi, Please try to upgrade to the firmware below and try again. Link: http://ftp.yealink.com/?ShareToken=151B445C224A38EFBC7273600F968669CBE9B6CF RE: T48G Incoming Call Problem - JUrso - 09-30-2015 01:43 AM (09-29-2015 03:01 PM)Yealink_Karl Wrote: Hi, That does seem to have fixed that issue. I'm concerned though about running an unreleased version. Can you tell me when the next official update will be? RE: T48G Incoming Call Problem - Karl_Yealink - 09-30-2015 09:32 AM (09-30-2015 01:43 AM)JUrso Wrote:(09-29-2015 03:01 PM)Yealink_Karl Wrote: Hi, Hi, It's hard to say, we don't have a explicit time right now. |