Yealink Forums
Falty T26 and T28 - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Video Collaboration (/forumdisplay.php?fid=5)
+--- Forum: VP530 (/forumdisplay.php?fid=25)
+--- Thread: Falty T26 and T28 (/showthread.php?tid=9351)



Falty T26 and T28 - srt10venomous - 09-29-2015 03:23 AM

Hello.

I am not sure who to reach out to but our supplier said we need to return direcectly to Yealink.

I have a customer who was installed last october has since had 3 of there phones turn bad slowly, They said a couple have been bad from the beginning but they had spares they used instead..

Now they are looking to replace them.. How do we go about this.

Thanks,

Pls call 360-229-7166 ext101


RE: Falty T26 and T28 - Yealink_Michael - 09-29-2015 05:42 AM

hello

thanks for your information

for the RMA, the process is like below :

1. send an email to support@yealink.com
2. the email should describe details about the issue you have
3. after Yealink people confirm it is hardware issue, then please connect your phone provide to replace the wrong part
4. if you can't get any help from them ,please provide the SN and MAC number of your phones together with the dealer information to Yealink , then we will try out best to help you !

BR
Michael


RE: Falty T26 and T28 - srt10venomous - 11-03-2015 06:39 AM

Hello Michael,

I use the company Voipsupply to get most of my product... I purchase from them and keep phones instock and use at anytime my customer needs phones,


But they said since I bought the phones from them they only allow me to RMA at 1 year from the day I buy them from them.. But I count the warranty from when I sell them to my customer .. So Voip Supply says the phones were out of warrant when I contacted them although the phones were not installed to several months later at that client..

How do I get around this? also who is a dealer you would recommend on the west coast of USA for me to deal with so we can help avoid this..

This customer needs 4 new phones as they failed over the course of a year ... and they don't want to be out of pocket for these..

Please help fix this.

Thanks,





(09-29-2015 05:42 AM)Yealink_Michael Wrote:  hello

thanks for your information

for the RMA, the process is like below :

1. send an email to support@yealink.com
2. the email should describe details about the issue you have
3. after Yealink people confirm it is hardware issue, then please connect your phone provide to replace the wrong part
4. if you can't get any help from them ,please provide the SN and MAC number of your phones together with the dealer information to Yealink , then we will try out best to help you !

BR
Michael