Yealink Forums
W52P and Asterisk Memmory Hunt - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: W52P and Asterisk Memmory Hunt (/showthread.php?tid=934)



W52P and Asterisk Memmory Hunt - SignalFire - 10-19-2013 03:46 AM

I am running a W52P base station with 4 handsets provisioned to it. When using Asterisk memory hunt feature of ring groups, some phones will not ring in correct sequence, and calls will disconnect while ringing.

The asterisk feature works well with my hardwired phones which include a mixture of T42G, Cisco, and soft-phones, but the W52P does not seem to handle it properly. Is there any way to make this work better?


RE: W52P and Asterisk Memmory Hunt - Yealink Support - 11-07-2013 10:50 AM

Hi SignalFire,

Which firmware do you use?
Can you upgrade to the latest firmware of boradoft version to test again?
http://www.yealink.com/SupportDownloadfiles_detail.aspx?ProductsID=534&CateID=308&flag=142

You can get more guides in our broadsoft solution module in below.
http://www.yealink.com/solution_list2.aspx?ProductsCateID=179&parentcateid=179&cateid=179&BaseInfoCateId=179&Cate_Id=179


RE: W52P and Asterisk Memmory Hunt - SignalFire - 11-07-2013 09:53 PM

We have been using:
26.30.0.50 ( Handset Firmware )
25.30.0.50 ( Base Firmware )

I will try to upgrade to broadsoft firmware and advise result.


RE: W52P and Asterisk Memmory Hunt - SignalFire - 11-07-2013 11:10 PM

Upgraded to the latest broadsoft firmware on the base and handsets. No improvement with hunt ring groups.


RE: W52P and Asterisk Memmory Hunt - Yealink Support - 11-12-2013 05:18 PM

Hi SignalFire,

Our R&D is solving this issue now and will release a fixed version for you.
If the version is released, i will update for you.


RE: W52P and Asterisk Memmory Hunt - Yealink Support - 12-17-2013 09:42 AM

Hi SignalFire,

Can you test below fixed versions and kindly feed back to me?

Base version:
ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/W52/25.40.0.16.rom

Handset version:
ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/W52/26.40.0.16.rom


RE: W52P and Asterisk Memmory Hunt - SignalFire - 01-14-2014 11:54 PM

The .16 firmware has fixed the handset ring sequence, but ring is still interrupted between hunt steps.


RE: W52P and Asterisk Memmory Hunt - Yealink Support - 01-15-2014 03:33 PM

Hi SignalFire,

1. There has been a call in a hunt group phone.
2. Then when a second call rings in this group, this previous call will disconnect.

Are above steps your issue scenario?

At the same time, for further troubleshooting, please supply me syslog level 6, config.bin and trace.

Before you export the syslog, please set log level as 6, and reboot the phone, then click Start,and reproduce the issue, then click Stop,and export the trace, syslog, config,bin to us.
(About where to export these files, please refer to attached screenshot.)

These three files are very important for us, hope you can kindly understand.


RE: W52P and Asterisk Memmory Hunt - Davinchee - 08-16-2016 03:56 PM

I have same problem ! What can we do ?