Yealink Forums
T42G Firmware Update, Now Display shows Yealink - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T42G Firmware Update, Now Display shows Yealink (/showthread.php?tid=932)



T42G Firmware Update, Now Display shows Yealink - SignalFire - 10-18-2013 04:51 AM

I just updated my T42G phone to firmware version 29.71.0.100.

Since doing so, the screen cycles a "Yealink" screen and back to the standard display every 5-10 seconds. All other operations seem to be working as expected.
Is this a bug, a configuration issue with new features, or a new "feature" of itself.

It is extremely annoying when looking down at my phone to often see "yealink" rather than the clock/phone status.


RE: T42G Firmware Update, Now Display shows Yealink - Yealink Support - 10-18-2013 06:01 PM

Hi SignalFire,

You can enter webpage->Feature->General Information->Use Logo,
turn it off. Then the System logo will dispear now.
And you can also upload your own custom logo.
Big Grin
Hope you enjoy our phones.


RE: T42G Firmware Update, Now Display shows Yealink - SignalFire - 10-18-2013 10:26 PM

Awesome! That did the trick. Thanks much!