Yealink Forums
3CX + T46G with EXP40 - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: 3CX + T46G with EXP40 (/showthread.php?tid=924)



3CX + T46G with EXP40 - Headon_Support - 10-16-2013 10:51 PM

Hello,

i've tried to autoprovision a T46G with the EXP40.

The BLF Buttons on the Phone itself works perfect.
But its not able to get the EXP 40 provisioned over the 3CX.

When i remember right, it worked perfect for the T2X and T3X series.

Does somebody has the same issue, or the is it possible to get the XML Code for the EXP40?

Thank you very much.
BR
Daniel


RE: 3CX + T46G with EXP40 - Yealink Support - 10-26-2013 11:22 AM

Hi Daniel,

Do you mean that you want to autoprovision BLF type in EXP40?
When you configure cfg and autoprovision it, the BLF information doesn't display in EXP40?


RE: 3CX + T46G with EXP40 - markslowe - 10-14-2016 09:02 AM

I have the exact same problem. Did you find a resolution?

(10-16-2013 10:51 PM)d.scheda@headon.at Wrote:  Hello,

i've tried to autoprovision a T46G with the EXP40.

The BLF Buttons on the Phone itself works perfect.
But its not able to get the EXP 40 provisioned over the 3CX.

When i remember right, it worked perfect for the T2X and T3X series.

Does somebody has the same issue, or the is it possible to get the XML Code for the EXP40?

Thank you very much.
BR
Daniel



RE: 3CX + T46G with EXP40 - DSchumacher - 10-20-2016 04:33 PM

Hello Daniel,

which 3CX Version and YL T46G firmware version are installed?

We have several YL T46G (FW 28.80.0.70) witch EXP40 modules in the field without any problems.

Regards,
Dominik


(10-16-2013 10:51 PM)d.scheda@headon.at Wrote:  Hello,

i've tried to autoprovision a T46G with the EXP40.

The BLF Buttons on the Phone itself works perfect.
But its not able to get the EXP 40 provisioned over the 3CX.

When i remember right, it worked perfect for the T2X and T3X series.

Does somebody has the same issue, or the is it possible to get the XML Code for the EXP40?

Thank you very much.
BR
Daniel