+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T20P 9.71.0.140 FW - 1MB per second limit (/showthread.php?tid=922)
T20P 9.71.0.140 FW - 1MB per second limit - Rudolf - 10-16-2013 06:22 PM
FYI
After upgrading T20P to firmware version 9.71.0.140 users could only get 1MB per second transfer speed if they connect through the phone to network.
Resetting phone to factory settings didnt help.
Ive gone back to 9.70.0.168 - (Last 3CX supported FW)
Not sure if there is some QoS or Bridge throttling setting in new FW?
RE: T20P 9.71.0.140 FW - 1MB per second limit - Yealink Support - 10-17-2013 09:46 AM
Hi Rudolf,
Could you upgrade to below firmware 9.71.0.144 to check again?
ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/T2x/V71/9.71.0.144.rom
Thanks.
RE: T20P 9.71.0.140 FW - 1MB per second limit - Rudolf - 10-17-2013 05:24 PM
Hi Admin
9.71.0.144 fixed the transfer issue thanks!
Whats the rollout plans to test the FW for 3CX PBX?
Cheers
RE: T20P 9.71.0.140 FW - 1MB per second limit - gimak - 10-29-2013 05:55 PM
I had the same problem, and it was fixed with firmware 9.71.0.144, but I have another problem now.
When I try to call from Call Panel ( Directory->Phone call info), I get a widget that say "Call failed".
I there something I can do? This feature used to work.
RE: T20P 9.71.0.140 FW - 1MB per second limit - gimak - 10-31-2013 02:36 PM
Any news in calling from the Call Panel?
RE: T20P 9.71.0.140 FW - 1MB per second limit - Yealink Support - 10-31-2013 03:56 PM
Hi gimak,
Please make sure you have enable IP address of PC in your webpage.
We add a secure feature that confine others to call out using URI, especially for hackers.
Please add the IP address that can control your phone.
( Please enter the webpage->Features->Remote Control->Action URI allow IP List, fill your IP address of PC in this place)
RE: T20P 9.71.0.140 FW - 1MB per second limit - gimak - 11-13-2013 01:38 PM
(10-31-2013 03:56 PM)Yealink Support Wrote: Hi gimak,
Please make sure you have enable IP address of PC in your webpage.
We add a secure feature that confine others to call out using URI, especially for hackers.
Please add the IP address that can control your phone.
( Please enter the webpage->Features->Remote Control->Action URI allow IP List, fill your IP address of PC in this place)
Worked perfectly for me
RE: T20P 9.71.0.140 FW - 1MB per second limit - gustavoy - 11-18-2013 12:41 AM
hi i have the same (1mbps) issue but on a t22 when are you planing to release this new firmware? thanks
RE: T20P 9.71.0.140 FW - 1MB per second limit - Yealink Support - 11-22-2013 04:31 PM
Hi all,
About this pc port issue, we have fixed it and release below beta versions.
ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/T2x/V71
RE: T20P 9.71.0.140 FW - 1MB per second limit - riroga - 05-20-2014 01:39 AM
appreciate it if someone could tell me what is the purpose or benefit of calling from the call panel
