+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: T20P Remove Country Code from Call Log (/showthread.php?tid=845)
T20P Remove Country Code from Call Log - nalinna - 09-26-2013 02:41 AM
Our VOIP sevrer does not allow country codes to be dialed prior to dialing out, and our T20P phones automatically append the country code to the call log. This is obviously frustrating while trying to dial out directly from the call log.
Anyone know if there's a way to remove the leading country code from the call log? Or if there's a way to replace any number that matches 1[0-9][0-9][0-9]-[0-9][0-9][0-9]-[0-9][0-9][0-9][0-9] with [0-9][0-9][0-9]-[0-9][0-9][0-9]-[0-9][0-9][0-9][0-9] (essentially cancelling the 1 out without forbidding the call)?
RE: T20P Remove Country Code from Call Log - Yealink Support - 09-28-2013 05:30 PM
Hi Nalinna,
Sorry Call log can't apply the replace rule.
Even you set Prefix as 1(.) and Replace as $1
When you dial 123456, it will dial out 23456, but if you call out from call log, it will not apply this rule.
Is it possible to modify this on your server?
Thanks.