+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T22P - choose line by default (/showthread.php?tid=8364)
T22P - choose line by default - gbs - 09-22-2015 03:19 PM
Hello everybody!
Please could you help me, i need to choose 2 line (account) by default for our users, because its an another SIP provider on this line, and the users use it more often.
1. So where i can configure phones to choose second account by default for outbound calls?
2. Or there is an another option, how i can configure the range of phone numbers go by one route and another range by another route?
RE: T22P - choose line by default - jcaruso - 09-23-2015 01:48 AM
Hi gbs,
I know when the phone is idle you can use the left and right arrow keys to set the default account. I just tested on my phone and it retained the default account through a reboot. I don't think this can be set by provisioning, someone may correct me on that if I'm wrong.
See this thread here: http://forum.yealink.com/forum/showthread.php?tid=78
RE: T22P - choose line by default - CWR - 09-23-2015 12:27 PM
I have not been able to set this before via provisioning. I ended up swapping the accounts.