BLF on line keys - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: BLF on line keys (/showthread.php?tid=784) |
BLF on line keys - jdackert - 09-19-2013 05:45 AM T-28 is putting the BLF lines from the Broadworks BLF list on the open Line keys rather than the desired DSS keys. I have one Line Account so with 6 lines in the BLF list, the 5 remaining line keys get a BLF line and the remaining BLF is on a DSS key. The BLF lines don't show on the phone GUI Account x screens. When I manually set each Phone>DSS Key>Memory Key with type "BLF List" and Line "Line1" and press Confirm, the screen reverts to only showing DSS Key 1 configure and there is no change on the phone. Also, the Phone>DSS Key>Line Keys defaults to "BLF List" and "Line 1" and changes revert after Confirm. I'd prefer a config file solution. Thanks, Jed RE: BLF on line keys - Yealink Support - 09-24-2013 04:21 PM Hi Jed, You can disable this feature via auto provision parameter: -------------------------------------------------- #Enables or disables the phone to automatically configure the BLF list keys. #0-Disabled 1-Enabled The default value is 1. phone_setting.auto_blf_list_enable = 0 -------------------------------------------------- Thanks. RE: BLF on line keys - jdackert - 09-25-2013 03:17 AM I set phone_setting.auto_blf_list_enable = 0 but it doesn't make any difference. When I add BLF in Broadworks the phone still puts them on the Line keys. I'm on v. 2.70.0.140 if that make any difference. RE: BLF on line keys - jdackert - 09-25-2013 08:01 AM I upgraded to 2.71.0.140 which stopped the Line key provisioning, but didn't provision the DSS keys. phone_setting.auto_blf_list_enable = 1 phone_setting.blf_list_sequence_type = 1 features.pickup.blf_visual_enable = 1 features.pickup.blf_audio_enable = 0 account.1.blf.blf_list_uri = Yea-BLF RE: BLF on line keys - Yealink Support - 09-25-2013 03:48 PM Hi Jdackert, Please try below parameter and check again: --------------------------------------------- bw.directory_enable = 1 phone_setting.auto_blf_list_enable = 1 phone_setting.blf_list_sequence_type = 1 features.pickup.blf_visual_enable = 1 features.pickup.blf_audio_enable = 0 account.1.blf.blf_list_uri = Yea-BLF --------------------------------------------- In V71 firmware, you should enable broadsoft featues first(bw.directory_enable = 1). Any test result please let us know, thanks. RE: BLF on line keys - jdackert - 09-28-2013 01:54 AM bw.directory_enable was it Thank you! |