Yealink Forums
MWI Not working with T20P - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Configuration (/forumdisplay.php?fid=24)
+--- Thread: MWI Not working with T20P (/showthread.php?tid=780)



MWI Not working with T20P - glenl - 09-18-2013 09:04 PM

Hi

We have T20P's here and a swyx phone system. The MWI is working fine as far as when someone leaves a voicemail the phones pick it up showing a new vm, and then you can use the message button to retreive the VM. HOWEVR once you have listened to the vm and deleted it, the MWI is still lit showing that there are still new VM's.

Any ideas pls on how to get this to refresh?? If i logon to the backend of the individual phone and change the refresh time then hit confirm it realises that there is now VM's however it all starts again with a new VM. I have upgraded to the latest FW.

Thanks

Glen


RE: MWI Not working with T20P - glenl - 09-20-2013 05:24 PM

Bump, anyone???


RE: MWI Not working with T20P - Yealink Support - 09-24-2013 01:49 PM

Hi Glenl,
Could you check your voicemail server(or check with your PBX provider) that whether you already deleted it? Generally it will not prompt again if you don't have new message.
Thanks.