Yealink Forums
T-4x Provisioning : linekey.x.pickup_value - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: T-4x Provisioning : linekey.x.pickup_value (/showthread.php?tid=779)



T-4x Provisioning : linekey.x.pickup_value - jonaskellens - 09-18-2013 08:41 PM

Hello,

I have the following in the configuration file :

linekey.4.line = 0
linekey.4.value = 10
linekey.4.pickup_value = **
linekey.4.type = 16
linekey.4.xml_phonebook =
linekey.4.label = 10

I notice however in the webinterface of my Yealink T-46G that for linekey 4 the field "Extension" is empty (in stead of holding the value '**').

How do I fill in the last field "Extension" of the line key via provisioning ??


RE: T-4x Provisioning : linekey.x.pickup_value - jfennell - 09-19-2013 11:24 PM

I just ran into this as well. For the 4XG series it looks like they changed the parameter name to extension.

So it would be

linekey.4.line = 0
linekey.4.value = 10
linekey.4.extension= **
linekey.4.type = 16
linekey.4.xml_phonebook =
linekey.4.label = 10


RE: T-4x Provisioning : linekey.x.pickup_value - Yealink Support - 09-23-2013 04:58 PM

Hello all,
As Jfennell mentioned, it should be "linekey.4.extension= **".
You can refer to the latest template from our website:
http://www.yealink.com/Upload/T4X/GA/AutoProvisioning.zip
Thanks.


RE: T-4x Provisioning : linekey.x.pickup_value - anonymous1659516244040 - 11-09-2013 01:02 AM

Dear Support,
pay attention, in your T41P download package,
http://www.yealink.com/Upload/T4X/T41/AutoProvisioning-T41P.zip
the common.cfg contains a mistake

################################################################################​#######
## Line Key ##
################################################################################​#######

#The x of the parameter "linekey.x.line" ranges from 1 to 15.
#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1.
#linekey.x.lable--Define the label for each line key.

#Configure Line Key1
linekey.1.line =
linekey.1.value =
linekey.1.pickup_value =
linekey.1.type =
linekey.1.label =

I think this causes misunderstanding, as jonaskellens wrote

Regards Walter


RE: T-4x Provisioning : linekey.x.pickup_value - Yealink Support - 11-13-2013 05:48 PM

Hi Walter,

Thanks for the advice. We will update the package.


RE: T-4x Provisioning : linekey.x.pickup_value - JamesK - 11-22-2013 11:39 PM

This has not been done as I just downloaded the package and the common still has the error in it


RE: T-4x Provisioning : linekey.x.pickup_value - Yealink Support - 11-25-2013 04:55 PM

Hi JamesK,

Sorry. My colleague from Document Department will solve this issue.


RE: T-4x Provisioning : linekey.x.pickup_value - Yealink Support - 11-25-2013 05:05 PM

Hi all,

Sorry. We are arranging a unify clear template for all our phones and will release it in December on the schedule.
Can you wait for the new template?


RE: T-4x Provisioning : linekey.x.pickup_value - JamesK - 11-26-2013 04:20 AM

i just went in and manually made the changes. So for me it of little issue now.