Yealink Forums
Chain an action & feature code - Printable Version

+- Yealink Forums (
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Chain an action & feature code (/showthread.php?tid=7773)

Chain an action & feature code - Ken Dever - 09-18-2015 11:32 PM

I was wondering if it was possible to put Transfer and then a feature code such as *53 all under a programmable key?

Purpose is to make less steps when transferring a call to a voice mail box.

RE: Chain an action & feature code - Yealink_Michael - 09-19-2015 05:24 AM


yes, you can do this , but just make sure the code is available to dial and when dial it , the call will connect the voice mail automatically .

settings like below :


in my configuration , when i am in a call now , then i press the dss key , then the call will transfer to 8564, just replace the 8564 to the feature code you needed