Yealink Forums
Action URL Request - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Wishlist (/forumdisplay.php?fid=13)
+--- Thread: Action URL Request (/showthread.php?tid=712)



Action URL Request - Billx - 08-05-2013 04:08 AM

I am using the Action URL "Log On" as a means to keep track of which phones are using which IP Address, their Extension Number, Display Name and MAC Address.

All works OK except that the system variable "$display_local " is not presented to me even though it is in the Action URL's "GET Request".

The other system variables $mac and $ip work just fine.

So, at this point, it looks like this is a design issue.

Could access to this system variable and perhaps all possible system variables be added in future firmware releases?

Thanks.


RE: Action URL Request - Yealink Support - 08-06-2013 02:36 PM

Hi Billx,
Do you mean when you fill "http:x.x.x.x/help.xml?display_local=$display_local" to Log on field, but the phone didn't report the display name of the caller or callee to your server?
How ever you can see this information in the HTTP GET message in the PCAP trace?

Could you provide PCAP trace, syslog(level 6) and config.bin file to us, so we can analyze?
Before you export the syslog, please set log level as 6, and reboot the phone, then click Start,and reproduce the issue, then click Stop,and export the trace, syslog, config,bin to us.
(About where to export these files, please refer to attached screenshot.)
These three files are very important for us, hope you can kindly understand.
Thanks.