+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Auto provision for t26 phones (/showthread.php?tid=699)
Auto provision for t26 phones - mitcheal - 08-01-2013 11:54 AM
I am extremely confused on auto provisioning.... I am testing with my desk phone... I can see the mac cfg file on the server after i create the extension within my pbx software... my pbx software uses tftp for communication. I understand that i can setup the firmware update through auto prov. i tried tonight with several tftp and/or ftp servers and the phone never update the firmware. Do i need to use the y00000xxx.cfg file for firmware updates? We are not using option 66 yet for phones... I'd like to use the RPS service at some point, but feel i need to understand auto prov. before i proceed.
thanks....
mitch.
RE: Auto provision for t26 phones - Yealink Support - 08-06-2013 03:00 PM
Hi Mitcheal,
What's the firwmare are you using on T26P now, and which firmware you want to upgrade to?
Could you send me your mac cfg file, so i can check the problem for you?
Thanks.