Softkey layout change doesn't work - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Softkey layout change doesn't work (/showthread.php?tid=695) |
Softkey layout change doesn't work - engine411 - 07-31-2013 07:16 PM On a T46G, in Settings-Softkey Layout-"On Talk" state, I removed the Hold button, but it remains as a softkey during use. Any ideas on why removing it in the web GUI doesn't actually remove it? RE: Softkey layout change doesn't work - CWR - 08-01-2013 12:18 AM did you also select ENABLE 'Custom Softkey' at the top of that screen ? RE: Softkey layout change doesn't work - engine411 - 08-01-2013 02:14 AM (08-01-2013 12:18 AM)craigreilly Wrote: did you also select ENABLE 'Custom Softkey' at the top of that screen ? No, I missed that. With that enabled, everything worked as expected. Thanks! RE: Softkey layout change doesn't work - CWR - 08-06-2013 04:35 AM my pleasure... |