Rebooting W52P to keep working - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23) +--- Thread: Rebooting W52P to keep working (/showthread.php?tid=692) |
Rebooting W52P to keep working - jhughes - 07-31-2013 02:54 AM My new phone system works great for a few hours and then I have to reboot (pull the power wire) on the W52P to keep the system working. I run both softphones and Polycom phones with no issues so I have rolled-out any issues with my PBX or networks. What happens is, after the Yealink handsets are inactive for a period of time I cannot receive a phone call or place a call unless I reboot the W52P. The handsets appear active and in the web interface they are said registered. When a call is placed I get a busy signal and the handsets do not say "Searching for the Bases". My firmware is 25.30.0.20. Any help is appreciated. RE: Rebooting W52P to keep working - Yealink Support - 07-31-2013 11:23 AM Hi Jhughes, Please try to upgrade the firmware 25.30.0.29: ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/W52/25.30.0.29.rom Any test result please let us know, thanks. RE: Rebooting W52P to keep working - jhughes - 07-31-2013 10:25 PM When I download the link it is a "Unknown" file name and will not upload since it is not a .rom format. There must be something wrong with the link, please provide a new link. Additional Post - I changed the file name to 25.30.0.29.rom and uploaded it. It seems to have taken. I will let you know how it works out. |