W52P User Agent different - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23) +--- Thread: W52P User Agent different (/showthread.php?tid=672) |
W52P User Agent different - antonio3ds - 07-25-2013 05:39 PM Hello I noticed that when accessing http / https to two headings (remote directory and local directory), the phone sends User Agent different from each other. I would like to have a firmware version for each access http / https has the same UserAgent. The version of my firmware is 25.30.0.30 Sincerely RE: W52P User Agent different - Yealink Support - 07-26-2013 02:54 PM Hi Antonio, Sorry i am not understand your meaning clearly. Do you mean when you use http and https to access to your directory, you found from PCAP trace that the User Agent sent from phone is different? Could you give me an example? Thanks. RE: W52P User Agent different - Yealink Support - 08-01-2013 08:58 AM Hi Antonio, Any updates? We tested at our side, but the user agent is the same, as below: User-Agent: Yealink SIP-W52P 25.30.0.221 00:15:65:40:ad:38 You said it's different, so could you provide the PCAP trace for us reference? And also provide these two different user agent? "Do you mean when you use http and https to access to your directory, you found from PCAP trace that the User Agent sent from phone is different? Could you give me an example? " Thanks. |