+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T26P - Hold & Resume (/showthread.php?tid=665)
T26P - Hold & Resume - pamheld - 07-24-2013 07:12 AM
Hello,
When an outside call is placed on hold, then we press resume, we can hear the outside caller but they cannot hear us. Any ideas?
Pam
RE: T26P - Hold & Resume - Yealink Support - 07-25-2013 02:36 PM
What's the firmware are you using?
Please upgrade to our latest firmware 6.70.0.140 and try again.
http://www.yealink.com/Upload/firmware/T2X/6.70.0.140.zip
Thanks.
RE: T26P - Hold & Resume - pamheld - 07-26-2013 01:27 AM
Hello - I received an e-mail reply from Yealink support, with the instructions to download 6.71.0.125 (attached to their e-mail). I did so for all our phones and the problem persists. So, 6.70.0.140 is the latest version?
RE: T26P - Hold & Resume - Yealink Support - 07-26-2013 03:01 PM
Hi Pamheld,
6.71.0.125 is newer version, but this firmware is still beta firmware, we still not release commecial V71 firmware.
Please update your result to support.usa@yealink.com, it will have higher priority.
Thanks.
RE: T26P - Hold & Resume - pamheld - 07-26-2013 11:40 PM
Gosh, I wish I'd known it was beta firmware before updating all the phones! I wonder why technical support asked me to update to a beta version? Is it possible to go backwards, i.e., now update to 6.70.0.140?
Here's the message they sent yesterday:
[undefined=undefined]In order to do a troubleshooting, could you tell me the firmware that your phone running?
Does this issue happen usually?
We have released a new version and fixed some bugs. Could you please update your phone to this version and test again?
ftp://Ailsa:6br6pcyl@ftp.yealink.com/6.71.0.125.rom
If you need more help, please contact me again.
Best Regards
________________________________________
USA Support Team
Yealink Network Technology Co., Ltd.[/undefined]
RE: T26P - Hold & Resume - Yealink Support - 07-31-2013 04:06 PM
Hi Pamheld,
They just want to check whether our beta firmware already fix this issue, if yes, we will release commecial firmware soon, so at that time, you can upgrade to our commercial firmware.
And after you upgrade to it, you can still go backwards.
So actually you can try 6.71.0.125 as they suggested. Thanks.
RE: T26P - Hold & Resume - stiliyanb - 07-11-2014 07:24 AM
Any updates on this issue? I have same problem with Yealink T22 and the latest firmware of 7.72.30. Any suggestions?
RE: T26P - Hold & Resume - hellcat1977 - 07-17-2014 11:31 PM
We have the same issue with the latest firmware, and we need it fixed. Please help!
Thanks,
Howie
RE: T26P - Hold & Resume - freddyalgra - 12-09-2014 11:40 PM
Hi,
is there already a solution on this problem.
we have it also. the phone is on firmware 6.72.188.3
best regards.
Freddy
RE: T26P - Hold & Resume - Yealink_Jim - 12-10-2014 03:51 PM
Hi,
Please go to below link to get the V73 beta version
ftp://yealinkftp:yealinkftp@ftp.yealink.com/00.Firmwares/V73/normal/6.73.0.16.rom