Yealink Forums
larger installations - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: larger installations (/showthread.php?tid=638)



larger installations - soapee01 - 07-16-2013 01:44 AM

Has anyone deployed more than a couple of these at a single location?

We were looking into the possibility of deploying 24 of these phones (with 6 bases). Buying the extra base (the way I read) means that all handsets can be on a call simultaneously. The 1 meter separation will be problematic, but probably less so than running new cabling. The 24 phones will be clustered together in the same room. Can an install like this be expected to run reliably?

Thanks


RE: larger installations - Yealink Support - 07-17-2013 01:40 PM

Hi Soapee,
1.Could you let us know how large of your room?
2.The distance between two bases should be larger than 1 meter. If it's larger than 1 meter, it's OK, no problem.
3. What kind of these users? Could you let us know more about this?
4. And could you also share more about this project? So we can give you more suggestions.
Thanks.


RE: larger installations - Irontec - 07-17-2013 03:31 PM

(07-17-2013 01:40 PM)Yealink Support Wrote:  Hi Soapee,
1.Could you let us know how large of your room?
[undefined=undefined]2.The distance between two bases should be larger than 1 meter. If it's larger than 1 meter, it's OK, no problem.[/undefined]
3. What kind of these users? Could you let us know more about this?
4. And could you also share more about this project? So we can give you more suggestions.
Thanks.

Sorry about the off-topic, but, ¿why do you say that the distance should be more than 1 meter?
We have a couple of bases in a mini-CPD very close each other, so can we have any problem with that?


Thanks.


RE: larger installations - Yealink Support - 07-17-2013 04:33 PM

(07-17-2013 03:31 PM)Irontec Wrote:  
(07-17-2013 01:40 PM)Yealink Support Wrote:  Hi Soapee,
1.Could you let us know how large of your room?
[undefined=undefined]2.The distance between two bases should be larger than 1 meter. If it's larger than 1 meter, it's OK, no problem.[/undefined]
3. What kind of these users? Could you let us know more about this?
4. And could you also share more about this project? So we can give you more suggestions.
Thanks.

Sorry about the off-topic, but, ¿why do you say that the distance should be more than 1 meter?
We have a couple of bases in a mini-CPD very close each other, so can we have any problem with that?


Thanks.
There maybe will have signal interfernce, so it's better not put the base so close.
Thanks.