Yealink W52P ResetBase -> UserAgent Empty - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23) +--- Thread: Yealink W52P ResetBase -> UserAgent Empty (/showthread.php?tid=583) Pages: 1 2 |
Yealink W52P ResetBase -> UserAgent Empty - antonio3ds - 06-26-2013 03:12 PM Hello I'm testing auto-provisioned phone Yealink w52p. When I do the factory reset the device loses its user agent and as a result I can not make it compatible with my application. I also noticed that during auto-provisioning does not install the firmware retrieves settings that I previously exported from the device. The firmware that I have tested are: - 25.30.0.20.rom - 25.30.0.26.rom If you install the firmware manually the device recovers its UserAgent and it works, but if you change firmware. I await your feed as soon as possible. RE: Yealink W52P ResetBase -> UserAgent Empty - Yealink Support - 06-26-2013 04:33 PM Hi Antonio, We fixed user agent empty issue in the below firmware: ftp://Cathy:6br6pcyl@ftp.yealink.com/firmware/25.30.0.28.rom Any test result please let us know, thanks. RE: Yealink W52P ResetBase -> UserAgent Empty - antonio3ds - 06-26-2013 10:28 PM I just tested the auto-provisioning, now the firmware updates from preprovisioning but the user agent of the device is still empty. I await your feed as soon as possible. RE: Yealink W52P ResetBase -> UserAgent Empty - Yealink Support - 06-27-2013 11:15 AM Hi Antonio, Please try to reset to factory default. Thanks. RE: Yealink W52P ResetBase -> UserAgent Empty - antonio3ds - 07-01-2013 10:55 PM the step of preprovisioning is complete. I have found another bug on the first priovisioning when I give him the path to the remote address book (. php formatted as xml) the message "Connect Error!" The device does not make the connection http / https, it loads the local directory but not the remote address book. I also noticed that if you go on dispositvo by webapplication and someone manually provisioning, device charging both headings. I urgency to resolving this unfortunate problem. Load the local directory and remote address book on the first provisioning. I await your feed RE: Yealink W52P ResetBase -> UserAgent Empty - Yealink Support - 07-02-2013 10:41 AM Hi Anton, I tried it and works well. Please check my cfg file and xml file as the attachment. The remote phonebook should be .xml format. Please have a try and let me know the result. Thanks. RE: Yealink W52P ResetBase -> UserAgent Empty - antonio3ds - 07-02-2013 03:35 PM Dear Yealink, I checked out, the stage of auto-provisioning charge the remote address book without problems, but after the first provisioning on my server gives me error. Please check as soon as possible. I await your feed RE: Yealink W52P ResetBase -> UserAgent Empty - Yealink Support - 07-02-2013 05:29 PM Hi Anton, Please upgrade to our latest firmware 25.30.0.30: ftp://Cathy:6br6pcyl@ftp.yealink.com/firmware/25.30.0.30.rom I checked at my side, and this firmware works well. Thanks. RE: Yealink W52P ResetBase -> UserAgent Empty - antonio3ds - 07-02-2013 06:02 PM Hello, I just checked, it is not a problem UserAgent. The problem that occurs in the access to the remote address book after the first provisioning. The stage of auto-provisioning is OK, load all the sections, remote and local phonebook. Subsequent to 'auto-provisioning with provisioning when it's the first all account data, the remote address book does not work. "Connect Error!" - LOAD ALL on auto-provisioning - NO LOAD on provisioning File: y000000000025.cfg #!version:1.0.0.1 auto_provision.pnp_enable = 0 auto_provision.mode = 1 auto_provision.repeat.enable = 1 auto_provision.repeat.minutes = 1 auto_provision.weekly.enable = 1 #auto_provision.weekly.mask = 0123456 #auto_provision.weekly.begin_time = 00:00 #auto_provision.weekly.end_time = 00:00 auto_provision.weekly.mask = auto_provision.weekly.begin_time = auto_provision.weekly.end_time = auto_provision.server.url = http://localhost/yealink/ auto_provision.pnp_domain_name = auto_provision.pnp_event_vendor = auto_provision.common_file_name = auto_provision.server.username = auto_provision.server.password = auto_provision.dhcp_option.enable = 0 auto_provision.dhcp_option.option60_value = 60 auto_provision.dhcp_option.list_user_options = auto_provision.aes_key_16.com = auto_provision.aes_key_16.mac = remote_phonebook.data.1.url = http://localhost/yealink/dinamic/rubricaRemota.php remote_phonebook.data.1.name = RubricaRemota directory.update_time_interval = 1440 Please check as soon as possible. I await your feed RE: Yealink W52P ResetBase -> UserAgent Empty - antonio3ds - 07-02-2013 09:18 PM I enclose current Syslog. look for the current url: "http://192.168.20.86:8080/yealink/dinamic/rubricaAz.php" 1) Auto-Provisioning Read remote address book. 2) Provisioning step does not read the remote address book, "Connect Error!" |