+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: Empty user agent string on T46G (/showthread.php?tid=554)
Empty user agent string on T46G - stefan@nunetworx.com - 06-18-2013 11:21 PM
When auto provisioning our phones we rely on the user agent string supplied by the phone in the request to the auto_provision.server.url to identify itself, i.e. "Yealink SIP-T46G 28.71.0.70 MAC-Address".
However, on our brand new T46G, firmware 28.71.0.70, it appears to send an empty user agent string by default.
If I export the configuration to config.bin, I can see a section that reads:
[ HttpServer ]
bEnable = 1
nPort = 80
strUserAgent =
strHttpVersion = 1.0
strUseragentDynm = SIP-T46G 28.71.0.70
And if I modify the strUserAgent string and import the configuration again, the phone does indeed supply the user agent string to the auto provision server.
Is there anything we can put in our auto provisioning configurations to get the phone to send a user agent string?
RE: Empty user agent string on T46G - Yealink Support - 06-19-2013 05:32 PM
Hi Stefan,
This is a known issue, please download below firmware and check again:
ftp://Cathy:6br6pcyl@ftp.yealink.com/firmware/28.71.0.85.rom
Thanks.
RE: Empty user agent string on T46G - stefan@nunetworx.com - 06-19-2013 10:02 PM
Thanks!
Problem fixed with the new firmware.
RE: Empty user agent string on T46G - Yealink Support - 06-20-2013 10:02 AM
Great!
RE: Empty user agent string on T46G - chopsywa - 08-10-2013 12:01 AM
Isaac
Your original problem was the user-agent string. MX can't handle colons in there.
When you upgraded your string changed (Mac address gone)
What is confusing to me is that I upgraded my T46 tonight to v.85, yet the agent string is still the same as yours on v.70.
Not sure what is going on here.
Mark
RE: Empty user agent string on T46G - Yealink Support - 08-12-2013 03:17 PM
(08-10-2013 12:01 AM)chopsywa Wrote: Isaac
Your original problem was the user-agent string. MX can't handle colons in there.
When you upgraded your string changed (Mac address gone)
What is confusing to me is that I upgraded my T46 tonight to v.85, yet the agent string is still the same as yours on v.70.
Not sure what is going on here.
Mark
Hi Mark,
Please reset to factory default and check again.
Thanks.
RE: Empty user agent string on T46G - chopsywa - 08-12-2013 03:48 PM
(08-12-2013 03:17 PM)Yealink Support Wrote:(08-10-2013 12:01 AM)chopsywa Wrote: Isaac
Your original problem was the user-agent string. MX can't handle colons in there.
When you upgraded your string changed (Mac address gone)
What is confusing to me is that I upgraded my T46 tonight to v.85, yet the agent string is still the same as yours on v.70.
Not sure what is going on here.
Mark
Hi Mark,
Please reset to factory default and check again.
Thanks.
Yes thanks for that. Already tried and it worked fine. Thanks again.