+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: T18 - No OK button so how do I reset it? (/showthread.php?tid=529)
T18 - No OK button so how do I reset it? - chrisb92 - 06-08-2013 04:08 PM
I've got some T18 phones here that need re-provisioning but I haven't been left an admin password for them.
Normally on my T20's I just hold down the OK button until it resets.
But there doesn't seem to be one on the T18's.
Whats the best way to reset theses?
Cheers
Chris
RE: T18 - No OK button so how do I reset it? - Yealink Support - 06-10-2013 09:30 AM
Hi Chris,
You can long press TRAN button until the LED status turn to fast blinking red twice, then press "#" button, Then T18 will restart to factory default.
Thanks.
RE: T18 - No OK button so how do I reset it? - Laz1971 - 12-18-2015 01:54 AM
Thanks!
I installed this firmware LAST_T18_UK_18.0.23.5 I found online and it's buggy....I'd like to either role back or install this version , 18.0.0.162 T18P. Can you please help me.
Thank in advance,
L
Obviously the hard rest above didn't role the version back.....