+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T20P - Dial Tone even in an unregistered or inactive line/account! (/showthread.php?tid=509)
T20P - Dial Tone even in an unregistered or inactive line/account! - ruiseixas - 06-02-2013 09:24 AM
Hi,
If an account isn't registered or active, the phone still gives the Dial Tone, giving the false indication of a registered Line!
Regards,
Rui
RE: T20P - Dial Tone even in an unregistered or inactive line/account! - Yealink Support - 06-04-2013 04:41 PM
Hi Rui,
Because for our IP phone, even the account isn't register or active, the phone can still use IP direct call, for example, you can just dial the IP address of another phone, then you can make the call to it.
Thanks.
RE: T20P - Dial Tone even in an unregistered or inactive line/account! - ruiseixas - 06-06-2013 03:26 AM
(06-04-2013 04:41 PM)Yealink Support Wrote: Hi Rui,
Because for our IP phone, even the account isn't register or active, the phone can still use IP direct call, for example, you can just dial the IP address of another phone, then you can make the call to it.
Thanks.
Ok,
Does that means that if I disable the "Allow IP Call" I only get the Dial Tone when the respective Line is registered?
Regards,
Rui
RE: T20P - Dial Tone even in an unregistered or inactive line/account! - Yealink Support - 06-07-2013 01:55 PM
Yes Rui,
So you can disable "Allow IP Call" in the webpage-Phone-Features-General Informations