![]() |
Disable voicemail beep with old configuration files - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Auto Provisioning (/forumdisplay.php?fid=14) +--- Thread: Disable voicemail beep with old configuration files (/showthread.php?tid=505) |
Disable voicemail beep with old configuration files - jcaruso - 05-30-2013 09:00 PM I was going to post a question requesting how to disable the voicemail tones on a T-26 if using the old provisioning configuration files, but I just figured it out. So instead I'll share my solution if anyone is having the same issue. We upgraded the phones to the latest firmware before V70. For the T-26 it was 6.61.23.16. After that I went into the individual MAC.cfg file for the phone and under [Features] I added VoiceMailTone = 0 This line disabled the voicemail beep without having to modify the tone settings, stutter, etc. RE: Disable voicemail beep with old configuration files - Bryan Nelson - 09-25-2013 03:45 AM (05-30-2013 09:00 PM)jcaruso Wrote: I was going to post a question requesting how to disable the voicemail tones on a T-26 if using the old provisioning configuration files, but I just figured it out. So instead I'll share my solution if anyone is having the same issue. And for those looking for the new format for provisioning like I was: Under ###Voice### section voice.tone.dial = voice.tone.ring = voice.tone.busy = voice.tone.congestion = voice.tone.callwaiting = voice.tone.dialrecall = voice.tone.record= voice.tone.info = voice.tone.stutter = voice.tone.message = 0 voice.tone.autoanswer = |