AutoAnswerDelay - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: AutoAnswerDelay (/showthread.php?tid=502) |
AutoAnswerDelay - airbase - 05-29-2013 08:50 AM Need you help guys. Where can I find the AutoAnswerDelay in firmware 9.70.23.2? Is this available? As far as I know this one is available in 9.61. thanks I am using T20P phone. RE: AutoAnswerDelay - Yealink Support - 06-05-2013 05:25 PM Hi Airbase, You can set this via auto provisioning: #Configure the delay time (in seconds)of auto answer. The time ranges from 1 to 4, the default value is 1s. features.auto_answer_delay = RE: AutoAnswerDelay - airbase - 06-06-2013 03:58 PM (06-05-2013 05:25 PM)Yealink Support Wrote: Hi Airbase, So we cannot just manually change it anymore? How to go about with auto provisioning? We are just starting on using yealink as our phone. thanks for the reply. RE: AutoAnswerDelay - airbase - 07-11-2013 02:42 PM I was able to use the auto provisioning and used the features.auto_answer_delay = 3 but its not working. The phone will still answer it in 1 second not 3. Please help. and also voice.tone.autoanswer => 360ms ? I can only put something like this: 500/100,0/30,800/100,0/30,1200/100 which is equal to 360ms of playing. am I right? please help as we need this feature badly. RE: AutoAnswerDelay - Yealink Support - 07-12-2013 05:10 PM Hello all, Sorry for this. I already submited this issue to our R&D, any update will let you know ASAP. RE: AutoAnswerDelay - Yealink Support - 07-12-2013 05:11 PM Because our auto answer beep tone is very short, by default, it will only ring "Du", this tone is short, maybe about 360ms |