T54W and DD10K - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: T54W and DD10K (/showthread.php?tid=47923) |
T54W and DD10K - buergstein - 08-11-2024 09:49 PM Hello from Germany, I use T54 phones with newest firmware and now bought two DD10K Dect-USB-adapters in hope to be able to use a DECT handphone as an additional device for an extension. Tried different devices from Siemens Gigaset. They register perfectly using the telephone´s menu. Incoming calls are signalized to both IP-phone and handset. But if I pick up the call, all I hear is just a noise tone. I thougt that DECT is a standard. May only Yealink handsets be used i order to work properly or is there a trick I can use to also "collaborate" with other DECT devices? Thanks, Stefan. RE: T54W and DD10K - complex1 - 08-12-2024 12:54 AM (08-11-2024 09:49 PM)buergstein Wrote: Hello from Germany, Hi Stefan, Unfortunately only the Yealink DECT handsets are supported by the DD10K USB dongle. https://support.yealink.com/en/portal/knowledge/show?id=6458b6edb1fa936c57b56d2e |