+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: T30P standart password doesn`t work (/showthread.php?tid=47882)
T30P standart password doesn`t work - k1ruxxa - 07-10-2024 05:23 PM
Good afternoon! My Yealink T30P is stuck on the initialization screen. I used the recovery files from this site http://yealink.provu.co.uk/fw/recovery / however, after I restored it, the standard admin admin bundle does not work to access the web interface. After recovery, I reset it to factory settings repeatedly, but it didn't help. I tried to restore with different firmware from the same site, but the effect is the same. Could you help me solve this problem, for example, by sending other files for recovery?
RE: T30P standart password doesn`t work - complex1 - 07-11-2024 03:42 AM
(07-10-2024 05:23 PM)k1ruxxa Wrote: Good afternoon! My Yealink T30P is stuck on the initialization screen. I used the recovery files from this site http://yealink.provu.co.uk/fw/recovery / however, after I restored it, the standard admin admin bundle does not work to access the web interface. After recovery, I reset it to factory settings repeatedly, but it didn't help. I tried to restore with different firmware from the same site, but the effect is the same. Could you help me solve this problem, for example, by sending other files for recovery?
Hi,
After you have put the recovery files on the phone, the phone still needs to be provided with the latest firmware.
After this, the phone needs to be reset to factory settings.
Now you should be able to log in to the phone with the standard passwords.