+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W60B（Wireless） (/forumdisplay.php?fid=59)
+--- Thread: Dial Number String Pause. (/showthread.php?tid=47855)
Dial Number String Pause. - mc6650@gmail.com - 06-27-2024 07:51 PM
Hello
First time posting.
I have a W60B base and several W56H cordless handsets. I want to be able to program a phone number with a pause. A standard “P” doesn’t seem to work. Is there another code that will work with these phones? Here’s an example of the number I’d like to program into the phone:
Complete Dial String = 1-800-XXX-XXXXPP1234
Number = 1-800-XXX-XXX
Pause = P
Extension Number = 1234
This number is entered into the contact list and allows for a caller to reach a specific extension number when dialing into a location that has an Auto Attendant / IVR. I’ve tried programming a number into a CSV file an uploading it to a phone, however that doesn’t seem to work. Any thoughts?
W60B Firmware = 77.85.0.160
W56H Firmware = 61.85.0.20
Thanks in advance for any help that can be provided.
RE: Dial Number String Pause. - Yisroel_MongoTEL - 06-28-2024 11:21 PM
Try using commas which are used in a lot of cases instead of the P.
1800XXXXXXX,,1234
If that doesn't work then use teh Yealink Macro commands (as described in Using Enhanced DSS Keys on Yealink IP Phones:
1800XXXXXXX$Cwc$$Cp2$1234$Tdtmf$