Yealink RPS supported versions - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: Yealink RPS supported versions (/showthread.php?tid=47715) |
Yealink RPS supported versions - kov - 05-16-2024 08:23 PM I'm looking into getting set up using Yealink RPS, and found the technical guide for using the API, and a short description about RPS. But i have multiple questions that i haven't been able to find answeres for, or any extended documentation for RPS setup. What versions/firmware-versions support using RPS ? Can i check my test device for whether it is using or trying to use RPS ? Does DHCP option 66 take precedence over RPS, or can i start using RPS even when the phone receives the dhcp options information, pointing it to another server ? Are there extended documentation, besides this https://www.yealink.com/en/onepage/yealink-free-remote-provisioning-service and this https://support.yealink.com/forward2filesystem/attachment/upload/attachment/2021-2-3/5/49bdb7cd-55de-40c4-a2c6-c88f6e3598f9/Yealink+Json+API+for+RPS+Management+Platform+V3.6.0.30.pdf |