+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: wall-mount bracket (/showthread.php?tid=474)
wall-mount bracket - bentljo - 05-22-2013 03:45 AM
I know the T22P can be wall mounted but the holes aren't standard; they are much wider than most phones I have worked with that are designed to mount on something like this:
http://tinyurl.com/n6lkm8s
Is there an adapter plate to enable it to mount on a standard wall box like this? http://tinyurl.com/mj7eag8
Thanks!
RE: wall-mount bracket - Yealink Support - 05-27-2013 11:25 AM
Hi Bentljo,
Sorry we don't have such adapter plate.
RE: wall-mount bracket - espressodaily - 07-14-2013 08:06 PM
Just bough 10 of these for my house. Was thinking the same. What did you wind up doing?
RE: wall-mount bracket - briankelly63 - 07-15-2013 11:03 AM
(07-14-2013 08:06 PM)espressodaily Wrote: Just bough 10 of these for my house. Was thinking the same. What did you wind up doing?
I don't remember my Aastra phones being able to mount to that type of plate either. Just left the plate or removed it and just positioned the phones over the cat5 cables wall box and set screws into wall.
Wasn't an issue.