Always on busy light led on wh66 base not extension - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: Always on busy light led on wh66 base not extension (/showthread.php?tid=47317) |
Always on busy light led on wh66 base not extension - supranet2022 - 02-06-2024 12:28 PM Dear community, I just bought a Yealink WH66 with an inductive charging station, and several times for a customer. So the device is connected to different computers. Firmware 125.435.0.10 104.35.0.6. What I don't understand or can't find a setting for is, that the red busy light LED on the base station itself, at the top right of the display, always lights up red. I can't find a setting on the computer or Yealink to turn it off, or the reason why it lights up red. It lit up red immediately after I unpacked and attached the headset. Yealink USB connect is installed and even if all soft clients are closed, it always lights up red. Not bad but a bit annoying - is there a setting here that I'm missing?? Thank you |