High-pitched noise coming from T19P E2 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: High-pitched noise coming from T19P E2 (/showthread.php?tid=47300) |
High-pitched noise coming from T19P E2 - pmarks - 01-27-2024 06:13 AM I've been running a T19P E2 for 4.5 years, powered from a PoE switch. Last month it started making an awful high-pitched noise continuously. I looked inside, and the noise is coming from a coil on a small circuit board. I considered covering it with hot glue or something, but the parts are too densely arranged and it's not even obvious how to desolder it. I was able to work around the problem with a USB to 5.5mm x 2.1mm barrel cable. Whenever I connect it to 5V power, the coil whine stops. This seems better than throwing the phone in the trash, but I preferred to run it from a single cable. I wonder if there's some way to obtain a replacement PoE board? |