Ringer volume IP Phone w connected WH67/WH63 headset

Ringer volume IP Phone w connected WH67/WH63 headset - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Accessories (/forumdisplay.php?fid=28)
+--- Thread: Ringer volume IP Phone w connected WH67/WH63 headset (/showthread.php?tid=47295)

Ringer volume IP Phone w connected WH67/WH63 headset - Conrad18 - 01-27-2024 02:14 AM

Hi Folks,

we have a bunch of Yealink Seriex T4x IP Phones in conjunction with WH67/WH63 headsets. If the headset is activated and a call comes in, the ringer volume of the IP Phone is double as loud as the headset is not activated.

I was looking around to decrease ringer volume of the IP Phone with activated headset but can't find any opportunity to do so.

However, most users are not aware about this strange effect but some feel uncomfortable. Especially there's no reason for the IP Phone to ring double as loud as normal if the headset is used.

Hopefully you folks can help out- what to do to lower (not switch off!) ringer volume of IP Phone if WH67/WH63 headset is used?

Thanks in advance!

RE: Ringer volume IP Phone w connected WH67/WH63 headset - seraphim19 - 02-01-2024 10:42 PM

(01-27-2024 02:14 AM)Conrad18 Wrote: Hi Folks,

we have a bunch of Yealink Seriex T4x IP Phones in conjunction with WH67/WH63 headsets. If the headset is activated and a call comes in, the ringer volume of the IP Phone is double as loud as the headset is not activated.

I was looking around to decrease ringer volume of the IP Phone with activated headset but can't find any opportunity to do so.

However, most users are not aware about this strange effect but some feel uncomfortable. Especially there's no reason for the IP Phone to ring double as loud as normal if the headset is used.

Hopefully you folks can help out- what to do to lower (not switch off!) ringer volume of IP Phone if WH67/WH63 headset is used?

Thanks in advance!

Have you tried to lock or limit the ringer via configuration parameters?

https://support.interactivetel.com/hc/en-us/articles/11917281831444-How-To-Lock-and-Limit-the-Ringer-Volume-Yealink

RE: Ringer volume IP Phone w connected WH67/WH63 headset - Eira Jeremie - 03-09-2024 12:53 PM

(02-01-2024 10:42 PM)seraphim19 Wrote:
(01-27-2024 02:14 AM)Conrad18 Wrote: Hi Folks,

we have a bunch of Yealink Seriex T4x IP Phones in conjunction with WH67/WH63 headsets. If the headset is activated and a call comes in, the ringer volume of the IP Phone is double as loud as the headset is not activated.

I was looking around to decrease ringer volume of the IP Phone with activated headset but can't find any opportunity to do so.

However, most users are not aware about this strange effect but some feel uncomfortable. Especially there's no reason for the IP Phone to ring double as loud as normal if the headset is used.

Hopefully you folks can help out- what to do to lower (not switch off!) ringer volume of IP Phone if WH67/WH63 headset is used?

Thanks in advance!

Have you tried to lock or limit the ringer via configuration parameters?

https://support.interactivetel.com/hc/en-us/articles/11917281831444-How-To-Lock-and-Limit-the-Ringer-Volume-Yealink my location

his can be helpful in ensuring that the ringer volume stays at a specified level and cannot be adjusted by individual users

RE: Ringer volume IP Phone w connected WH67/WH63 headset - Theirat1991 - 04-08-2024 03:38 PM

(02-01-2024 10:42 PM)seraphim19 Wrote:
(01-27-2024 02:14 AM)Conrad18 Wrote: Hi Folks,

we have a bunch of Yealink Seriex T4x IP Phones in conjunction with WH67/WH63 headsets. If the headset is activated and a call comes in, the ringer volume of the IP Phone is double as loud as the headset is not activated.

I was looking around to decrease ringer volume of the IP Phone with activated headset but can't find any opportunity to do so.

However, most users are not aware about this strange effect but some feel uncomfortable. Especially there's no reason for the IP Phone to ring double as loud as normal if the headset is used.

Hopefully you folks can help out- what to do to lower (not switch off!) ringer volume of IP Phone if WH67/WH63 headset is used?

Thanks in advance!

Have you tried to lock or limit the ringer via configuration parameters?

https://support.interactivetel.com/hc/en-us/articles/11917281831444-How-To-Lock-and-Limit-the-Ringer-Volume-Yealink battleship online

Thanks for the source.