+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T3xP Series (/forumdisplay.php?fid=22)
+---- Thread: T30 peer-2-peer call (/showthread.php?tid=47160)
T30 peer-2-peer call - mikrob - 12-08-2023 11:26 PM
How can I set up "direct call" to another T30? Didn't find a suitable option in the settings. firmware 124.86.14.5
RE: T30 peer-2-peer call - complex1 - 12-09-2023 02:58 AM
(12-08-2023 11:26 PM)mikrob Wrote: How can I set up "direct call" to another T30? Didn't find a suitable option in the settings. firmware 124.86.14.5
Hi,
Not for sure if you mean this, but give it a try:
https://support.yealink.com/en/portal/knowledge/show?id=91d143e99142bf0960d736ad
RE: T30 peer-2-peer call - mikrob - 12-10-2023 02:01 AM
(12-09-2023 02:58 AM)complex1 Wrote:(12-08-2023 11:26 PM)mikrob Wrote: How can I set up "direct call" to another T30? Didn't find a suitable option in the settings. firmware 124.86.14.5
Hi,
Not for sure if you mean this, but give it a try:
https://support.yealink.com/en/portal/knowledge/show?id=91d143e99142bf0960d736ad
This option was enabled, but it still didn't work. I rolled back the firmware to 124.86.0.40 and then it started.